Replacement Bearings, Races, Grease Seal and Hub For a 2007 EZ Loader Customs Boat Trailer
Published 08/27/2021 >
Products Featured in This Question
Question:
I am trying to figure out the correct hub assembly or bearing kit to use on my 2007 Custom EZ Loader. The VIN# 1L8BAEKB07AXXXXXX if that helps. Havent had them apart yet to see the numbers on the bearings. Id like to have what I need before I start the project. At the very least I would like to get the bearings, races and seals. Im concerned about being able to get the races off the existing hubs so I thought the hub assemblies would make things a lot easier as Im not experienced with replacing wheel bearings.
asked by: Gary A
Expert Reply:
Your hub on your 2007 EZ Loader Custom trailer uses a unique size Grease Seal # 168255TB (inner diameter 1.687"). We do not have any bearing or hub kits that will have all the correct parts for your hub. Here is a list off the parts you would need to build your own bearing kit.
Inner Bearing # L68149
Inner Race # L68111
Outer Bearing # L44649
Outer Race # L44610
Grease Seal # 168255TB
If you would like to replace the hub that will already have the correct bearing races already installed, I recommend the Dexter Trailer Hub and Drum Assembly # 8-247-50UC3. As this assembly includes as standard size grease seal you will still need the Grease Seal # 168255TB to fit your axle correctly. The assembly does include the correct size bearings and races to fit your axle and new lug nuts.
Product Page this Question was Asked From
Dexter Oil Seal - Double Lip - I.D. 1.687" / O.D. 2.561" - 3.7K to 4.2K Axles - Qty 1
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.69 Inch I.D.
- 2.56 Inch O.D.
- 3700 lbs Axle
- 4200 lbs Axle
- Dexter
more information >
Featured Help Information
Miscellaneous Media






Continue Researching
- Q&A: Replacement Grease Seal For Seal Marked TBY 42.77 65.07 12.7
- Q&A: Replacement Idler Hub For Old Boat Trailer With DICO 45264 Idler Hubs
- Q&A: Replacement Hub/Rotor Assembly for a Dexter Boat Trailer Axle DX67HR
- Q&A: Which Caliper Should Be Used With The Dexter 9-3/4" Hub-and-Rotor Assembly DX82UR?
- Q&A: Correct Replacement for UFP H-1377 Trailer Hub
- Q&A: What Bearing Kit and Replacement Parts for My Dexter Vault do I Need for 3,500 Axle Skeeter Boat?
- Q&A: Recommended Grease Seals For Dexter 9919860 3,500lb Axles
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Wiring Diagrams
- Article: How to Bleed Your Trailer Surge Brakes
- Article: Most Popular Wheel Bearings
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: How To Measure And Replace Everything In Your Hub Assembly

