Glue to Use to Connect RV Sewer Pipe

Question

Question:

I need to glue together two Valterra black rigid rv sewer adapters for something Im working on for my RV. What type of glue will work best with this type of plastic? Thanks.

asked by: Ray D

0

Expert Reply:

When gluing together Valterra RV sewer pipes like the # T1028 you'd need to use an ABS solvent cement like the part # A05-0303.

expert reply by: Jameson C

0

Answer 1

We sure do Scott! You'll want the LaSalle Bristol Cable-Actuated RV Waste Valve for Black Water Tank item #34466N4AB96GMA. This installs on a 3" pipe and has that 96" cable you're looking for. What kind of RV do you have?

view full answer...

Answer 2

When RV sewer pipes are attached they use a solvent like the #A05-0303 that permanently attaches the two pieces. There isn't a way to separate them and only option is to cut off the old section and glue on a new part.

view full answer...

Answer 3

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Answer 6

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 7

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

view full answer...

Answer 8

The B&W Universal Base Rails and Installation Kit for 5th Wheel Trailer Hitches - 10 Bolt #BWRVR3200 will fit your 2018 Ford F-250 with aluminum bed but B&W doesn't recommend it. You will want to use some sort of spacers/isolators that…

view full answer...

Answer 9

Hey Don, thanks for reaching out! The correct fit for your 2024 Ford F-250 with the Tremor package is the Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR. I confirmed with my contact at Hellwig that this will fit specifically with your Tremor…

view full answer...

Answer 10

Hey Robert, congrats on your new 5th wheel trailer! It is highly recommended to use a sliding hitch like the B&W Companion item #BWRVK3370 the shorter 6-3/4' bed on your 2026 Ford F-350. The slider will ensure you have clearance when making…

view full answer...

Answer 11

Hey Adam, we have just what you are looking for with the B and W fifth wheel rail kit part #BWRVK2402 which is a confirmed fit for your 2017 Ford F-250 and is the industry standard rail design which means it will fit the hitch you have. This is a…

view full answer...

Answer 12

Hi David, I just want to make sure we're talking about the same type of hitch. The B and W Conversion Hitch part #BW55RV is designed to replace the pin box on a fifth wheel trailer and convert it to a gooseneck connection. Since your 2022 ATC…

view full answer...

Glue to Use to Connect RV Sewer Pipe

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching