This sewer slip hub bolts onto your gray-water waste valve. 1-1/2" Hub slides onto gray-water waste pipe and secures with ABS solvent bond (A05-0303 - sold separately).
Features:
Specs:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi there, I'm Michael with etrailer.com. Today, we're gonna take a quick look at this Valterra RV Sewer Slip Hub with flange. Now, this is an ABS plastic sewer slip hub that's gonna connect your sewer pipe to your gray water waste valve, and this will also be able to double as a two inch spigot. So this is going to have a 1 1/2 inch hub that's gonna slide into your gray water waste pipe, this will secure with ABS solvent bond, and you can pick that up here at etrailer.com using the part number you see on the screen there if you don't already have some for yourself to make sure that you have a nice, secure seal there. And then this flange will bolt on to your gray water waste valve, but the hardware to get this mounted is not included, and so, you will have to provide that yourself. Give you a few measurements here, make sure that this is gonna work for you.
So you can see our inner diameter of our opening here is just shy of two inches, about 1 7/8 of an inch, so that's where your two inch spigot comes from, your outside diameter is about 2 1/4 of an inch. On the inside here, you can see we've got a reducer lip in there, so our inner diameter is gonna be about an inch and a half, so you can see there, so that's where our inch and a half measurement comes from. As far as the flange, we're at right about 2 7/8, so about three inches by, again, 2 7/8, about three inches. Our holes, mounting holes, are spaced about 2 1/2 inches apart center to center as you can see there. This is gonna stick out from the flange about 7/8 of an inch, just shy of one inch there.
So again, make sure this it's gonna work for you. We do have that ABS solvent bond available to make sure that you have a nice, firm connection, and you will have to provide that hardware, but otherwise, I think this will do a great job of meeting your needs. That completes our look for today. Again, I'm Michael with etrailer.com, thanks for watching.
Do you have a question about this RV Sewer Hose Fitting?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.