Replacement Disc Brake Kit For Homemade Boat Trailer and TDE 46245 Rotors
Updated 08/21/2021 | Published 08/20/2021
Products Featured in This Question
Question:
Hi there I bought a boat and trailer in Fl the boat and motor is a 2004 boat proline 21.8 cc tandem axle trailer with homemade vin plate I think 3500 lb axles brake calipers are gone I pulled the disc hub combo off it is stamped TDE 46245 -21.6 mm . tie down 70E actuator on trailer . what Kodiak brakes can I put back on the trailer I dont know if all 3500 lb axles are standard please help I need brakes Thanks
asked by: George H
Helpful Expert Reply:
Your TDE 46245 looks to use the Bearings # L68149 and # L44649 which are the common bearings used on most 3,500lb axles. You can check and see if your rotors do have these same bearings used on your axle in case they were changed at some point.
These are the same bearings that are used on the Kodiak Disc Brake Kit # K2HR35DKG.
As this is being used for a boat trailer the best option is the Stainless Steel Kodiak Disc Brake Kit # K2R35S. This includes stainless steel rotors, calipers, mounting brackets and hardware for superior rust prevention. These rotors are more like vehicle rotors in they are not built into the hub. A Trailer Idler Hub Assembly # AKIHUB-545-35-G-K would be needed to complete the installation on your boat trailer.
(click to enlarge)
Product Page this Question was Asked From
Kodiak Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet and KodaGuard - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- LH
- RH
- 3500 lbs
- Brake Assembly
- 5 on 4-1/2
- Hub and Rotor Assembly
- Kodiak
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Kodiak 10" Hub-and-Rotor Assembly - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Shop: Kodiak Disc Brakes - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs - E-Z Lube
- Q&A: Can Kodiak Hub # KHR10D Replace Trailer Hub TDE 46245
- Q&A: Disc Brake Kit to Replace TDE 43245 with Stainless Steel Components
- Q&A: How To Find Correct Replacement Disc Brake Pads for TDE 46245
- Q&A: Replacement Hub/Rotor and Bearings for Tie Down Engineering TDE46245
- Q&A: Replacement Disc Brake Trailer Hub With Rotor And Bearing Kit To Replace TRE 46245
- Q&A: Replacement Hub and Rotor Assembly with 5 on 4-1/2 Bolt Pattern for 3,500 Pound Trailer Axle
- Q&A: Replacing Older Tie Down Engineering 46210 and 46845 Trailer Hubs