How Much Does The Draw-Tite Hitch Receiver For A 2021 Tesla Model Y Weigh

Question

Question:

Would you please confirm the actual weight of the hitch. 31 lbs listed seems light. Thank you,

asked by: Todd

0

Expert Reply:

That is the actual weight of the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2", part # DT58MR. This hitch receiver does not have the usual brackets that secure it to your vehicle, but it is not significantly lighter than any of our other more traditionally designed hitch receivers.

expert reply by: Mark Smith

0

Answer 1

I reached out to Torklift (they make the EcoHitch) and the EcoHitch Invisi Trailer Hitch Receiver - Custom Fit - Class III - 2" #EH39FR is a confirmed fit for a 2020 Tesla Model Y. The only hitch I have been able to confirm is the EcoHitch.…

view full answer...

Answer 2

Yes, installation of the Draw-Tite Max-Frame #DT58MR will require removal of the rear bumper beam on your 2023 Model Y. The hitch bolts-on in place of the bumper beam, replacing it completely. You can hang onto or discard the bumper beam following…

view full answer...

Answer 3

I recommend installing the EcoHitch Trailer Hitch Receiver #EH39FR for your 2023 Tesla Model Y and here is why: Both the Draw-Tite #DT58MR and the EcoHitch #EH39FR install behind the bumper and have a really clean appearance, but the main difference…

view full answer...

Answer 4

The main difference between the Draw-Tite Max-Frame Trailer Hitch Receiver #DT58MR and EcoHitch Invisi Trailer Hitch Receiver #EH39FR is going to be the construction. The Draw-Tite #DT58MR is going to be a steel construction with an e-coat base and…

view full answer...

Answer 5

The correct trailer hitch for your 2020 Tesla Model Y is the EcoHitch Invisi Trailer Hitch Receiver #EH39FR. The Draw-Tite Max-Frame Trailer Hitch Receiver #DT58MR you're looking at fits the 2021 and newer models. I did notice in the Draw-Tite…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 10

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 11

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

How Much Does The Draw-Tite Hitch Receiver For A 2021 Tesla Model Y Weigh

Continue Researching