Need A Hitch For My 2020 Tesla Model Y.

Question

Question:

Hi, any reason you guys do not appear to carry a Model y hitch for 2020? The 2021 model is the same?

asked by: Vincent

0

Expert Reply:

I reached out to Torklift (they make the EcoHitch) and the EcoHitch Invisi Trailer Hitch Receiver - Custom Fit - Class III - 2" # EH39FR is a confirmed fit for a 2020 Tesla Model Y.

The only hitch I have been able to confirm is the EcoHitch. There have been some changes to the Model Y from 2020 to 2021 so without being able to have a technician and manufacturer confirm we can not give a definitive answer yet.

expert reply by: David B

0

Answer 1

Yes, installation of the Draw-Tite Max-Frame #DT58MR will require removal of the rear bumper beam on your 2023 Model Y. The hitch bolts-on in place of the bumper beam, replacing it completely. You can hang onto or discard the bumper beam following…

view full answer...

Answer 2

That is the actual weight of the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2", part #DT58MR. This hitch receiver does not have the usual brackets that secure it to your vehicle, but it is not significantly lighter…

view full answer...

Answer 3

The correct trailer hitch for your 2020 Tesla Model Y is the EcoHitch Invisi Trailer Hitch Receiver #EH39FR. The Draw-Tite Max-Frame Trailer Hitch Receiver #DT58MR you're looking at fits the 2021 and newer models. I did notice in the Draw-Tite…

view full answer...

Answer 4

I recommend installing the EcoHitch Trailer Hitch Receiver #EH39FR for your 2023 Tesla Model Y and here is why: Both the Draw-Tite #DT58MR and the EcoHitch #EH39FR install behind the bumper and have a really clean appearance, but the main difference…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 9

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Need A Hitch For My 2020 Tesla Model Y.

Products Featured in This Question

Continue Researching