Easy Solution for Needing Replacement Breakaway Pin for Unknown Breakaway System

Question

Question:

I have a 2018 Flagstaff microlite 27 ft trailer. My safety cable broke, do you know if this one fits that trailer? The plug looks the same but cant tell for sure.

asked by: Steve W

0

Expert Reply:

I have a much easier solution for you but it's really hard to pick out an exact replacement plunger for a breakaway setup unless you happen to know the exact brand of the breakaway system. But since the entire switch assemblies are completely universal you can just replace the switch and plunger like with # 3802348 and you'll be good to go.

expert reply by: Jameson C

0

Answer 1

Trailer breakaway switches are designed to be somewhat challenging to remove. If you are pulling straight out though it will come without damaging anything. The switches are universal though so if you have the part #K71-691 you could replace it with…

view full answer...

Answer 2

The minimum air pressure to leave in an Air Lift LoadLifter 5000 like part #AL57297 for a 2WD or part #AL57295 for a 4WD 2012 Ram 3500 is 5 psi. This is just to ensure that the bags don't damage themselves if you were to drive over rough terrain.…

view full answer...

Answer 3

Since the Replacement 42" Cable for Breakaway Switch #3802350 is specifically made for the Bright Way Breakaway Switch #3802348, there is no way of knowing if it is a confirmed fit for another brand of switch without physically testing it. I…

view full answer...

Answer 4

The Electric Trailer Brake Kit part #AKEBRK-35 are designed to be used with 3,500 lb. axles with 10-1/2" x 2-1/4" brake drums. In order to determine if these brakes will fit your trailer axle. You will need to do a bit of measuring. The…

view full answer...

Answer 5

The best option we have for you are new braking assemblies, the Electric Trailer Brake Kit part #AKEBRK-35-SA for Self-Adjusting or part #AKEBRK-35 for Manual-Adjusting. That said, we don't have the replacement brake shoes you are after but the…

view full answer...

Answer 6

Hey Dave. To add a hitch to your 2019 Jeep Cherokee, I recommend our etrailer Hitch item #e73ZR. This hitch is custom fit for your Jeep and comes with all hardware necessary to complete the installation. It fits all models including the Trailhawk.…

view full answer...

Answer 7

The Replacement 42" Cable for Breakaway Switch from Bright Way Group, #3802350, will fit most models of ESCO break away switches. If you don't want to take a chance on it not fitting, I would instead recommend replacing the switch with part…

view full answer...

Answer 8

While we do have a couple Replacement Cables and Pins #3802350 & #SM99905 they are not always compatible with every Breakaway Switch #HM20010. I recommend replacing the switch with the Fastway Zip Trailer Breakaway Switch with Coiled Cable…

view full answer...

Answer 9

Hey John, the replacement gear kit you'd need is the part #TJD-12000-RODNUT which I attached two pictures that have instructions and an install diagram.

view full answer...

Answer 10

A keen observation indeed, Brett. The mounting hole spacing on the Square D-Ring Tie-Down Anchor #ABS69FR is 3" horizontally and 3-1/4" vertically. I edited a picture for you to help illustrate.

view full answer...

Answer 11

You're certainly not the first person to ask about the Atwood 85739 master cylinder but those replacement parts are simply no longer available which means your best option truly is to replace your actuator. I completely understand this isn't…

view full answer...

Answer 12

I really wish we had replacement parts still for the Atwood couplers but since they've been out of business for so long we don't have any way to get the parts you are wanting.

view full answer...

Easy Solution for Needing Replacement Breakaway Pin for Unknown Breakaway System

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching