Are Replacement Parts Available for the 9025 Thule Apex Bike Rack?

Question

Question:

Hello. I need a replacement bolt, nut, washer, and wrench for a 9025 thule 4 bike rack. I bought it about 10 years ago so Im not sure if theres a standard size for this. Any assistance you can provide would be greatly appreciated.

asked by: Jon

0

Expert Reply:

I went through the instructions and replacement parts for a Thule 9025 Apex 4 bike rack, but I was unable to find a replacement nut or washer. However, I did find the bolts and wrenches that are direct replacements. The # 852-311-5001 (M6-25mm Button Head Screw) and # 852-3136-001 (M8x30 Flat Head Screw) will be the replacement bolts, and the # 853-2430-02 (4MM Hex Key) and # 853-0930 (M5 Hex Key) will be the replacement wrenches.

expert reply by: Lazer S

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

In order to determine the correct replacement braking assemblies for any given trailer you must first know the axle capacity. I am sure we have the correct replacement braking assemblies but in order to confirm we again need to know the axle…

view full answer...

Answer 3

We offer two styles of hitches for your 2022 Subaru Ascent, a fully visible model such as the Curt #C13400 or the etrailer brand #e35ZR or the partially concealed Curt #C25VR and etrailer #e55ZR. The #C13400 or #e35ZR mount to the underside of the…

view full answer...

Answer 4

Hey Joel, There are a couple important differences between the Thule Camber 4-Bike Rack #TH9056 and Thule Apex XT 4-Bike Rack #TH9025XT. One of them is indeed the locks, as the Camber does not have locks while the Apex comes with a lock for the rack…

view full answer...

Answer 5

Since you have the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" Item #C13200 on your 2017 Toyota Highlander you aren't limited to a certain type of rack because your hitch is a class III hitch receiver. Both the Thule Apex XT 4…

view full answer...

Answer 6

Thanks for the pictures! I have a set of flush mounted crossbars that will work with your Kia's raised rails, however the Yakima RailBar Crossbars item #Y00447-2 won't work. They don't fit Kia's rails. It looks like they are for older…

view full answer...

Answer 7

I'd recommend going with the #e94CR Class III hitch for your 2021 Audi Q5. As you can see in the provided photo, the hitch receiver sits pretty tight to the furthest most surface of the back bumper, it doesn't stick out so far that banging…

view full answer...

Answer 8

The Thule Apex 4 Bike Rack for 1-1/4" and 2" Hitches has been discontinued by the manufacturer. The most similar option that I recommend as an alternative is the Yakima RidgeBack 4 Bike Rack - 1-1/4" and 2" Hitches - Tilting…

view full answer...

Answer 9

There are indeed a couple options for a Thule roof rack for your 2023 Kia Telluride, with the difference being the crossbars and how they mount. I have added a couple photos for you showing the difference in how they look (note the photos are of the…

view full answer...

Answer 10

Hey Patrick, yes we can confirm that the Stealth hitch part #SH48GR does fit the 2024 Kia EV6 Wind RWD model!

view full answer...

Are Replacement Parts Available for the 9025 Thule Apex Bike Rack?

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching