Correct Replacement 16 8-Bolt SR004-B Aluminum Trailer Wheel

Question

Question:

The camper rim I have is 16X16J : SR004-B max 3960lbs SR wheels 110 psi It is damaged and I need another one. Do you have one that would match it?

asked by: Trenton K

0

Expert Reply:

The correct replacement wheel you're after appears to be the Aluminum Bearcat Trailer Wheel part # 274-000039 which measures 16" diameter x 6" wide and has an 8 on 6-1/2" bolt pattern.

expert reply by: Conner L

0

Answer 1

For your application I recommend going with the Aluminum Bearcat Trailer Wheel #274-000039. This meets the specs you're looking for but is the Lionshead Gunmetal Gray Bearcat wheel instead. Unfortunately, Lionshead has been discontinuing some of…

view full answer...

Answer 2

Lionshead does not offer us a version of the Bearcat trailer wheel part #274-000039 that comes with any tires mounted on it so if you wanted a Load Range E tire for it, you'd need to order it separately like with the Goodyear Endurance part…

view full answer...

Answer 3

Hey Adam, thanks for reaching out! The 16" 8 Lug Aluminum Bobcat Trailer Wheel LHSO513B was discontinued earlier this year (2024) so I recommend replacing it with the Gunmetal Gray Aluminum Bearcat Trailer Wheel #274-000039 instead. This is also…

view full answer...

Answer 4

The Aluminum Bearcat Trailer Wheel #274-000039 is currently the only size we carry in a 16" diameter. This is the Gunmetal gray color and has an 8 on 6-1/2" bolt pattern. It is also the correct width for a ST235/80R16 Radial Trailer Tire…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 10

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 11

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6 inch whereas the 225/75-15 fits widths that are 5 inch to 6-1/2 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 12

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Correct Replacement 16 8-Bolt SR004-B Aluminum Trailer Wheel

Continue Researching