Options For Replacement Wheels Without Lug Nuts For Trailer
Published 07/13/2021
Products Featured in This Question
Question:
I had the same problem as the guy above, one set of tires with lugs and none on the back. I figured out how to get them off, but what do I replace them with?? I cannot find new wheels with no lugs.
asked by: Krystal W
Expert Reply:
I may have an option for you, but there are not replacement wheels available like yours that do not use lug nuts.
If your current wheels are in good shape then the most cost effective option will be reusing them.
If they are damaged then only option would be checking to see if there is a standard hub compatible with your spindle. What you will need to do is look for the bearing numbers stamped on the bearings of the hub as shown in the included picture of the # L44649.
If the bearings are worn to the point that you cannot read the bearing numbers then you will need to use digital calipers # PTW80157 to precisely measure your spindle in the location shown in the included diagram.
With the bearing combination I would be happy to check if there is a standard hub available that will fit your spindle.
(click to enlarge)
(click to enlarge)
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 6,000-lb Axles - 6 on 5-1/2
- Trailer Hubs and Drums
- Idler Hub
- Standard
- 25580 / 15123
- Standard Grade
- For 6000 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- 18 Inch Wheel
- 18-1/2 Inch Wheel
- Dexter
more information >
Continue Researching
- Search Results: punch
- Search Results: l44643
- Search Results: bearing race tool
- Search Results: race punch
- Search Results: boat trailer wheels trailer tires and wheels
- Video: How to Install: EcoHitch Hidden Trailer Hitch Receiver on your 2024 Toyota RAV4
- Q&A: Bearing Kit to Replace Timken 07100 Bearings on a Boat Trailer
- Q&A: Bearing Replacement Recommendation for Timken 07100
- Q&A: Trailer Tire Size Close to 4.80-8 Tire Overall Diameter
- Q&A: Does Race Need To Be Replaced If Installing New Bearings
- Q&A: Replacement Bearing and Race for Timken 07100 Bearing and 07205 Race
- Q&A: Determining Which Replacement Bearing, Race, and Seal For Spindle Using 07100 Bearing
- Q&A: Diameter/Height of 4.80/4.00-8 and 5.70-8 Tires
- Shop: Replacement Trailer Hub Bearing - L44643
- Shop: Timken Bearing Kit, L44643 Inner/Outer Bearings, L44610 Inner/Outer Races, 204507 Seal
- Shop: Timken Replacement Bearing and Race Set - L44643 and L44610
- Shop: Bearing Kit for 1" BT8 Spindle, L44643 Inner/Outer Bearings, 34823 Seal
- Search Results: trailer valve stems
- Search Results: idler hub
- Shop: Trailer Hitch
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - Galvanized
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 5 on 4-1/2 - Galvanized
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 4 on 4 - Galvanized
- Article: Trailer Wiring Diagrams
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Wiring
- Article: How to Choose the Right Trailer Hitch Class
- Shop: Suspension Enhancement
- Shop: Brake Controller
- Video: Curt T-Connector Vehicle Wiring Harness Review C56040
on Trailer Hubs and Drums
