Replacement Bearing and Race for Timken 07100 Bearing and 07205 Race

Question

Question:

Hello, Do you carry a bearing equivalent to the timken 07100-SA and 07205 race?

asked by: John D

0

Expert Reply:

We do! Your Timken bearing 07100-SA is the same as the Replacement Trailer Hub Bearing # L44643. For a matching race you'll need the part # L44610 as well.

Attached are some review videos for you to check out.

expert reply by: Jon G

0

Answer 1

You can use the other components you remove from your hubs. After you have removed the hub components you will want to inspect all of the parts and replace if you find any discoloration or signs of wear or damage such as a nick. On the race you can…

view full answer...

Answer 2

Actually the overall diameter/height of those tires are different by a few inches. The overall diameter of a 4.80/4.00-8 tire is 16.1 inches. The overall diameter of the 5.70-8 tire is 18.1 inches. The outer diameter of the #AM10002 tire you were…

view full answer...

Answer 3

The 07100 bearing number you referenced is an Timken bearing that has the same dimensions as #L44643.

view full answer...

Answer 4

The correct replacement bearing for your Timken 07100 is the #L44643, but to determine the correct race and grease seal you will need to measure your hub. As long as the outside diameter of your current race is 1.980" you will be able to use…

view full answer...

Answer 5

Your Timken 07100 bearings have the same dimensions as bearing #L44643. They both have a 1 inch inner diameter and fit a BT8 spindle. The correct bearing kit is part #BK1-100. The Bearing Buddy protector to fit is part #BB1980A-SS in stainless steel…

view full answer...

Answer 6

The special trailer tire size 4.80-8 does have an overall diameter of right around 16-inches when the tire is mounted on the rim and inflated. The other popular trailer tire size that has about the same overall diameter is the 165/65-8 size, which is…

view full answer...

Answer 7

I may have an option for you, but there are not replacement wheels available like yours that do not use lug nuts. If your current wheels are in good shape then the most cost effective option will be reusing them. If they are damaged then only option…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 12

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Replacement Bearing and Race for Timken 07100 Bearing and 07205 Race

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching