How To Find Correct Replacement Hubs for Rockwood Pop-Up Trailer
Updated 07/12/2021 | Published 07/09/2021
Question:
Im looking for a hub assembly for my 94 rockwood 1940 pop up.
asked by: Jesse R
Helpful Expert Reply:
In order to find the correct replacement idler hub assembly for a trailer, you'll need to know the axle capacity. This can be found by crawling under the trailer and reading the axle tag on the center of the beam. If there is no tag present you must pull the hubs apart and measure the bearings or read their part numbers. The bolt pattern of the wheels will also need to be noted. The Trailer Idler Hub Assembly part # AKIHUB-440-2-2K for example is common found on 2,000 lb axles and has a 4-bolt pattern. I have attached a full list of options below as well as the info needed if the axle tag cannot be found.
Unfortunately, we cannot confirm fit of replacement parts for a trailer using the make/model.
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44649 Bearings - Pre-Greased
- Trailer Hubs and Drums
- Idler Hub
- Pre-Greased
- Standard
- L44649 / L44649
- Standard Grade
- For 2000 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 8 Inch Wheel
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Video: Trailer Hub and Drum Assembly: The Breakdown
- Shop: Vehicle Tow Bar Wiring
- Q&A: Replacement Axle Recommendation For Small Popup Camper
- Q&A: Replacement 145/12 Trailer Tires and Wheel for Rockwood Freedom Pop Up
- Q&A: Difference Between Idler and Braking Axle
- Q&A: Replacement Hub For A 1994 Rockwood 2040 Pop-Up Camper
- Search Results: 5 on 5 inch trailer hubs and drums
- Search Results: 175 80 13
- Search Results: wheel hub assembly
- Search Results: trailer hubs and drums
- Search Results: electric drum brakes trailer brakes
- Search Results: rockwood
- Shop: Timbren Axle-Less Trailer Suspension w Electric Brakes - Standard - 4" Drop - 5 on 4-1/2 - 3.5K
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44649 Bearings - Pre-Greased
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 5 - Pre-Greased
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44643 Bearings - Pre-Greased
- Shop: Easy Grease Trailer Hub and Drum Assembly for 2K Axles - 7" - 5 on 4-1/2 - L44649 - Pre-Greased
- Shop: Custer Trailer Connector Adapter w/ Dust Cover - 7-Pole Round Pin to 7-Way Blade
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Q&A: What Does BTR and BT8 Mean when Picking Out Replacement Trailer Hub
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Article: Slipper Spring Trailer Suspension System Review
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: The Best 5th Wheel Hitches
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: How to Measure Your Trailer Wheel Bolt Pattern