Replacement Axle Recommendation For Small Popup Camper
Updated 09/04/2014 | Published 09/01/2014
Products Featured in This Question
Question:
I am looking for an axel for my popup camper. The measurements are 53 1/4inch spring center and 66inch hub to hub.
asked by: Scott N
Expert Reply:
The axles we offer are available in 3 lengths. They are 60 inch, 72 inch, and 89 inches hub-face to hub-face, but I may have a solution for you.
We do offer axle-less systems that are either bolted or welded to the trailer frame. This would replace the axle and suspension system you currently have on your camper. If you are looking for a system that has a 3,500 lb weight capacity, I recommend part # A35RS545. This is a straight spindle and has a 5 on 4-1/2 bolt pattern.
For a system with the electric brakes included, I recommend part # A35RD545E. This also includes a 4 inch drop spindle.
For a 2,000 lb weight capacity I recommend part # A20RS440. This has the hubs included and has a 4 on 4 bolt pattern.
Product Page this Question was Asked From
Timbren Axle-Less Trailer Suspension w Idler Hubs - Standard Duty - No Drop - 5 on 4-1/2 - 3,500 lbs
- Trailer Axles
- Rubber Spring Suspension
- Standard Grade
- Idler Hubs
- 3500 lbs
- 5 on 4-1/2 Inch
- Universal Fit
- No Drop or Lift
- Timbren
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: rv access door
- Shop: Dexter Trailer Hub and Drum Assembly for 2,200-lb Axles - 7" Diameter - 4 on 4
- Article: How to Measure a Trailer Axle
- Article: How to Tell the Weight Rating of a Trailer Axle
- Shop: Timbren Axle-Less Trailer Suspension w Idler Hubs - Standard Duty - No Drop - 5 on 4-1/2 - 3,500 lbs
- Shop: etrailer Electric Trailer Brakes - 7" - Left/Right Hand Assemblies - 2,000 lbs
- Shop: Valterra Electrical Cable Hatch for RVs - 4-9/16" Diameter - Black
- Shop: B&B Electrical Cable Hatch for RVs - 4-5/8" Diameter - Polar White
- Search Results: axle lift kit
- Search Results: torsion axle
- Video: In-Depth Review of the 4-Leaf Slipper Spring w/ Radius End for 2,000-lb Trailer Axles
- Video: Review of EMCO Trailer Leaf Springs - 4 Leaf Slipper Spring With Open Eye 4300 lbs Axle - EM98AJ
- Video: Hands-On with the 4-Leaf Slipper Spring w/ Radius End for 2,000-lb Trailer Axles
- Video: Review of EMCO Trailer Leaf Springs - 4 Leaf Double Eye Spring 2000 lbs Trailer Axle - EM26AJ
- Q&A: Does It Matter If the Spring Center and Hub Face Is Different When Replacing A Trailer Axle
- Q&A: Correct Lift Kit for a 1995 Jayco 1006 ST with a Dexter 2,400 lb. Torflex Axle
- Q&A: Lift Kit that Fits Trailer with Dexter Torflex 2,400 lb Axle
- Q&A: Ways To Determine Bearing Sizes Used On a Dexter 3500LB Trailer Axle
- Q&A: Locating Replacement Bearings for 1995 Jayco Eagle 10 Pop Up Camper
- Q&A: Parts Required to do Over/Under Conversion on 1-3/4 Axle on Tractor Supply Trailer
- Q&A: Is There An Axle Flip Kit for a 2,000 Lb 1-3/4 Inch Diameter Axle
- Search Results: axle
- Search Results: trailer suspension parts
- Search Results: etrailer trailer axles
- Search Results: trailer axles
- Shop: Dexter Trailer Axle with Idler Hubs - 4 on 4 Bolt Pattern - 72" Long - 2,000 lbs
- Shop: Dexter Electric Trailer Brakes - 7" - Left/Right Hand Assemblies - 2,000 lbs to 2,200 lbs
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
on Trailer Axles
