Will Curt Trailer Hitch Receiver C13381 Fit A 2021 Volkswagen Tiguan
Updated 07/06/2021 | Published 07/03/2021
Products Featured in This Question
Question:
Hi there, Two questions for you folks: 1 I have a 2021 VW Tiguan SE. I want to buy a hitch receiver primarily for a bike rack but also for the occasional use of a utility trailer. I was all set to buy the C13381 when it suddenly disappeared from the compatibility list for my car. Was a fit problem found with the 2021 model of the car? Right now Im looking at the C12177 as an alternative. It looks like it will work although I really wanted a 2inch receiver if possible. Is this still my best option? 2 I think I would need a ball mount with a riser to accommodate a typical utility trailer. Is this true and, if so, which would you recommend? Thanks a lot for your help
asked by: Seward P
Expert Reply:
I would be happy to help!
First the Curt Trailer Hitch Receiver # C13381 is indeed confirmed to fit your 2021 Volkswagen Tiguan. The reason it was pulled down as a confirmed fit for a bit was due to the 2021 Tiguan requiring mounting hardware where the 2020 and older used factory hardware. Curt realized this issue and is now including the hardware with the # C13381 so it can be installed on your Tiguan.
Between the # C13381 and # C12177 you were looking at I recommend the # C13381 as it has a 2" receiver which is much more desirable when it comes to accessories like a bike rack or ball mount as you will have more options than the 1-1/4" receiver of the # C12177.
When we installed the # C13381 on a similar 2020 Tiguan we found from the ground to the top inside edge of the receiver measures 12-1/4" so you are correct that you will more than likely need a ball mount with rise. To determine how much rise you need you will need to measure from the ground to the bottom of the coupler of your trailer. The difference between this measurement and the 12-1/4" will determine how much rise or drop you need.
If you do not have a trailer then your best bet is the etrailer Ball Mount Kit # 989900 due to it including two hitch balls, 1-7/8" and 2", and two ball mounts, one with a 1" rise, and one with a 3" rise, so you will have plenty of options compatible with most trailers.
To complete your towing setup you will also need a vehicle wiring harness # 118811.
Lastly if you do not already have a bike rack I recommend taking a look at the Thule Hitching Post Pro - Folding Tilting 4 Bike Rack w Anti-Sway - 1-1/4" and 2" Hitches # TH934XTR which will accommodate four bikes weighing up to 35lbs each. This rack includes anti sway cradles to keep the bikes from moving around and hitting each other while you are on the road, and the rubber coating will protect the frames on your bikes from getting scratched or damaged.
I included videos for each of the products mentioned for you to take a look at.
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
- Trailer Hitch
- For Towing
- Class II
- 350 lbs TW
- 3500 lbs GTW
- 1-1/4 Inch Hitch
- Concealed Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Wiring
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Search Results: trailer hitch ball mount
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Video: Detailed Breakdown of the Curt Ball Mount for 2" Hitches
- Video: A Closer Look at the Flint Hill Goods Adj Ball Mount
- Q&A: Total Amp Rating Of Tekonsha T-One Needed For 4-way Connection To Uhaul 5x9 Utility Trailer
- Q&A: Distance from Center of Hitch Pin Hole to Support Gusset on Draw-Tite Ball Mount 2793
- Search Results: 2inch ball
- Search Results: trailer lights wiring
- Search Results: trailer lights connector
- Shop: Flint Hill Goods Adj Ball Mount - 2" Hitch - 8" Drop/7-1/4" Rise 5K
- Shop: Curt LED 4-Way Flat Connector (Vehicle End) Tester
- Shop: Curt Ball Mount for 2" Hitches - 6-1/4" Rise, 7-1/2" Drop - 13" Long - 5,000 lbs
- Shop: Curt Ball Mount for 2" Hitches - 7" Rise, 8-1/4" Drop - 9-3/8" Long - 10,000 lbs
- Q&A: Why is Trailer Wiring that Draws from Vehicle Battery Better than Non-Powered Kit
- Q&A: Can the 12 Volt Power Wire from a Trailer Wiring Harness Tap Into a 12 Volt Accessory Outlet
- Q&A: Is The Curt 4-Way # C56403 Better Or Worse Than The Tekonsha 4-Way # 118811 On a 2022 VW Tiguan?
- Q&A: Will Tekonsha T-One Vehicle Wiring Harness 118811 Fit 2023 VW Tiguan
- Shop: Trailer Hitch
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
- Search Results: trailer hitch
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Trailer Wiring Diagrams
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Search Results: trailer wiring
- Video: Clean Up Your Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Video: Curt T-Connector Vehicle Wiring Harness Review C56040
on Trailer Hitch
