Different Configurations for the Titan Brake Actuator 20K for Drum Brakes
Updated 07/05/2021 | Published 07/02/2021
Products Featured in This Question
Question:
I dont see any way to attach the coupler... normally there would be a 3inch channel. The other part that is similar has a nice channel, but it includes a lunette ring I dont need and is much more expensive... otherwise, these look like the same coupler. Do you have to weld a channel to this actuator?
asked by: Steve
Helpful Expert Reply:
There are several different versions of the Titan Brake Actuator like bolt-on, part # T1664900. In regards to the attachment selection, there are multiple different options for this as well. The now discontinued T1055100 is with no attachment so you'd need to supply your own but it does come with a channel mount like part # T4856920, a lunette ring like part # T1297400, and a standard coupler like part # T2477600. There are also different finish and weight capacity options.
If you can let me know which exact configuration you're looking for I would be glad to help narrow down your searches but if not, I have attached out list of options below.
Product Page this Question was Asked From
Dexter Brake Actuator - Painted - Drum - Lunette Ring - Weld On - 20,000 lbs
- Brake Actuator
- Surge Brake Actuator
- Farm Trailer
- Construction Trailer
- Weld-On
- 20000 lbs GTW
- Lunette Ring
- 3 Inch Channel Tongue
- Drum Brakes
- No Lockout
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Replacement Front Roller for Dexter Model 10 and 20 Brake Actuator
- Shop: Replacement Front Roller Bolt for Dexter Model 10 Brake Actuator
- Shop: Manual Reverse Lockout Kit for Demco Hydraulic Trailer Brake Actuators
- Shop: Dexter Adjustable-Channel Brake Actuator - Painted - Drum - Weld On - 20,000 lbs
- Video: Breaking Down the Replacement Inner Slide Centering Rail for Model 20 Actuator
- Video: Review of Titan Brake Actuator - Replacement Roller Nut - T44VR
- Search Results: dexter brake actuator
- Video: An In-Depth Look at the Dexter Hydraulic Brake Actuator
- Shop: Replacement Inner Slide Centering Rail for Model 20 Actuator - Qty 1
- Shop: Replacement 5/8"-18 Outer Roller Hex Nut for Dexter Model 20 Brake Actuators - Qty 1
- Shop: Dexter Brake Actuator - Painted - Drum - 2-5/16" Ball - Weld On - 20,000 lbs
- Q&A: How Do The D-Ring Tie-Down Anchors for C-Channels on Lets Go Aero Trailers Install?
- Q&A: Replacement Titan Surge Brake Actuator for Model 10 Part 3241639
- Q&A: Recommended Bearings for a AL-KO T44 Axle
- Q&A: Where Do the Rubber Bearings Go On the Titan/Dico Model 10 Surge Brake Actuator
- Article: Types of Bumpers
- Article: Adding Electric Over Hydraulic Disc Brakes
- Q&A: Is There a Repair Kit For a Thumb Latch Coupler # CA-5400-B?
- Q&A: Comparing Timken Bearing Kits TMK34ZR And TMK54ZR
- Q&A: Does Demco Coupler part # 12564 Come with Install Bolts