Will etrailer Trailer Hitch Receiver e65ZR Fit 2022 Subaru Outback Wagon Wilderness?

Question

Question:

Is this hitch compatible with the 2022 Outback Wilderness since it has a different rear bumper molding than the other outbacks?

asked by: Mike W

0

Expert Reply:

I am happy to confirm that the Curt Trailer Hitch Receiver # C67JR you were looking at is confirmed to fit all models of the 2022 Subaru Outback Wagon so it will fit your 2022 Subaru Outback Wagon Wilderness even though it uses a slightly different rear bumper.

This hitch has a 350lb tongue weight rating and 3500lb trailer weight rating so it is a perfect choice for carrying a bike rack, cargo carrier, or even for a ball mount for towing a trailer.

expert reply by: Samuel C

0

David

9/5/2024

Hi Samuel, FYI Curt datasheet for their 13494 says 350lb tongue weight. Their datasheet for Curt's predecessor for 6th gen outbacks called Curt 13437 says 600lb tongue weight.

Samuel C.

9/6/2024

@David Hi David, Yep looks like Curt updated their capacity on this hitch since 2021 when this answer was written. I updated to the current specs, thanks for pointing that out!

Answer 1

I can certainly help you out with using your 2022 Subaru Outback Wilderness to tow a trailer. You will want to use a trailer hitch receiver like Curt Trailer Hitch Receiver 2" #C67JR which offers a simple no-drill installation. A ball-mount will…

view full answer...

Answer 2

We do actually have a video of the Curt #C67JR being installed on a 2022 Subaru Outback Wilderness! I have it linked below. You will not need to remove the bumper cover to get the #C67JR installed, but you will have to lower the exhaust and pop those…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 6

Hey Dan, we actually have a few install videos for hitches on a 2023 Subaru Outback Wagon but most of them are for the Curt hitch part #C67JR or the etrailer part #e25TR. I attached install videos down below on this page for both for you to check…

view full answer...

Answer 7

Hey Frank! This is a newer product, so there aren't many long-term owner reviews available yet. That said, we have done extensive testing on the Benton MoveHitch #B86VR. A strain gauge was used to measure the forces the carrier experiences during…

view full answer...

Answer 8

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 9

Hello Charles, Great question. The only difference between the etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" #e25TR, and the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #C67JR is the…

view full answer...

Answer 10

Thanks for supporting a local business Christopher! So long as your 2012 Chevrolet Silverado is a 1500 and you need a class IV hitch, the Curt item #14301 is going to be the best option. It has a 2" receiver with a 10,000 lbs towing capacity and…

view full answer...

Answer 11

Hey Kimmy, awesome picture! For a hitch I recommend our own etrailer Trailer Hitch Receiver #e25TR. This has a concealed cross tube for a nice clean look and better ground clearance. It also has a matte black finish which will blend in well with the…

view full answer...

Answer 12

Hi Jeffrey, For a hitch for the 2026 Subaru Outback Wilderness that installs behind the bumper, I recommend the etrailer Class III Trailer Hitch Receiver part #e25TR. The cross tube is totally hidden behind the bumper, and only the hitch receiver…

view full answer...

Will etrailer Trailer Hitch Receiver e65ZR Fit 2022 Subaru Outback Wagon Wilderness?

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching