Can Reese 83660 Friction Sway Control Be Used on Both Sides of Trailer Frame

Question

Question:

when using two of these is there a left and right or do you take this apart to alter for dual application.

asked by: Jim G

0

Expert Reply:

There isn't a left and a right. The unit is set up for the right side of the trailer, when adding a second, you'll turn the lever to the 'off' position, loosen the adjustment bolt and slide out and flip the slide bar so the socket is at the bottom. This will allow the Reese # 83660 Friction Sway control to be used on the left side of the trailer.

I've linked to a product description video that you might find helpful.

expert reply by: Mike L

0

Setting Up 83660 For Left Hand Side of Trailer
(click to enlarge)

Answer 1

Hey Brian, thanks for reaching out! Your 2012 Honda Pilot has a unibody frame and according to page 544 of your owner's manual Honda doesn't recommend you use on either. Since this is the case, I recommend installing the Timbren Rear…

view full answer...

Answer 2

We do have the correct SnapPad's that you need but the SnapPad XTRA Jack Pads for Lippert Leveling Systems w/ 5-1/2" Square Jack Feet #SN68FR would not be the correct ones if you have 6" feet. The correct SnapPads would be the SnapPad…

view full answer...

Answer 3

Yes, the Reese Friction Sway Control Kit #83660 can be used with the Reese Pro Round Bar Weight Distribution #RE34FR. You may need to move the brackets back on the weight distribution hitch to get the ball for the sway control at its 24" center…

view full answer...

Answer 4

Yes, you will. The Reese Pro Round Bar Weight Distribution System item #RE34FR has built in sway control that will keep your trailer in line with your Ram when you make sudden moves or get passed on the highway by a semi. This system has a tongue…

view full answer...

Answer 5

Your camper is not too light for a weight distribution system and the Reese Pro Round Bar Weight Distribution item #RE34FR will work on your trailer. This system works with trailer's that have a tongue weight between 200 lbs and 600 lbs. The…

view full answer...

Answer 6

The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow. This figure also includes the weight of any cargo behind the rear axle of the tow vehicle. I attached…

view full answer...

Answer 7

Pertaining to the Reese Pro Round Bar Weight Distribution Hitch #RE34FR, the head itself without a ball is about 20 lbs. The shank is about 25 lbs. The ball itself would be 3 lbs. Each spring bar is about 12 lbs apiece.

view full answer...

Answer 8

Choosing a ball mount with the proper rise or drop is not an exact science. I typically recommend allowing for 1 to 2 inches for sag once the trailer is coupled. This figure can increase of decrease depending on the trailer tongue weight and the…

view full answer...

Answer 9

The Reese Weight Distribution System w Shank - Round Bar part #RE34FR does not utilize friction sway control. It is simply a weight distribution system that will redistribute the weight of your setup with the spring bars which will help to reduce…

view full answer...

Answer 10

Since you are towing with a 2015 Toyota Sienna I strongly recommended using a weight distribution system. Weight distribution systems should be used when the trailer being towed weighs 50% or more of the vehicles weight. It looks like your 2014 Jayco…

view full answer...

Answer 11

The Reese Pro Round Bar Weight Distribution part #RE34FR only comes with a 2-5/16" hitch ball but you can purchase a 2" and swap it out yourself using the 2" Hitch Ball part #A-90. If you don't have the tools to swap it out just…

view full answer...

Answer 12

You will be able to back up with the Reese Pro Round Bar Weight Distribution item #RE34FR set up. It may be a lot easier to remove the springbars from the weight distribution system first but it isn't necessary. You won't have any issues with…

view full answer...

Can Reese 83660 Friction Sway Control Be Used on Both Sides of Trailer Frame

Featured Help Information

Miscellaneous Media

Continue Researching