Recommended Weight Distribution System for a 3,000 lbs Trailer

Question

Question:

Will I benefit by using a Reese RE34FR on a trailer that weighs 3033# and has a tongue weight of 343# with a 2018 Ram 3.6L with Timbren bump stops?

asked by: Roy R

0

Expert Reply:

Yes, you will. The Reese Pro Round Bar Weight Distribution System item # RE34FR has built in sway control that will keep your trailer in line with your Ram when you make sudden moves or get passed on the highway by a semi. This system has a tongue weight range of 200 lbs - 600 lbs so it will be perfect for your 3,033 lbs trailer. This system includes a 2" shank and a 2-5/16" hitch ball.

expert reply by: Jerred H

0

Answer 1

Hi there Jaime; thanks for the question and you are right on the money for the Reese weight distribution hitch that will work with your Coleman 17B: - Reese Pro Round Bar Weight Distribution #RE34FR This is rated for tongue weights between 200 lbs…

view full answer...

Answer 2

Hello Glenn. We do offer an extended shank that can be used with a WDH, the Equal-i-zer Weight Dist Shank #EQ90-02-4500. This shank is about 6" longer than the standard shanks that come with the Equal-i-zer hitches. That said, the Equal-i-zer WD…

view full answer...

Answer 3

The Reese Weight Distribution System w Shank - Round Bar - 6,000 lbs GTW, 600 lbs TW #RE34FR is 49911 you referenced. It definitely doesn't sound right that there is more than 4 inches of difference from the base of the hitch ball when inverting…

view full answer...

Answer 4

For a weight distribution hitch that won't break the bank I recommend the Reese Pro Round Bar Weight Distribution w Sway Control #RE34FR. When choosing a WDH you want to make sure you choose the right system based on your tongue weight. Tongue…

view full answer...

Answer 5

You'd probably be okay without a weight distribution system but I pulled up the weight of an Airstream Caravel and found that it weighs 3,500 lbs and has a tongue weight of 500 lbs which is enough weight that you would see benefit by going with a…

view full answer...

Answer 6

Yes, the Reese Weight Distribution System with Shank part #RE34FR will work on a 4,500 lb trailer. That said, hitch weights listed online are dry and you also need to add the weight of any cargo behind the rear axle. Therefore, you are likely…

view full answer...

Answer 7

Hey Brian, thanks for reaching out! Your 2012 Honda Pilot has a unibody frame and according to page 544 of your owner's manual Honda doesn't recommend you use on either. Since this is the case, I recommend installing the Timbren Rear…

view full answer...

Answer 8

The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow. This figure also includes the weight of any cargo behind the rear axle of the tow vehicle. I attached…

view full answer...

Answer 9

Pertaining to the Reese Pro Round Bar Weight Distribution Hitch #RE34FR, the head itself without a ball is about 20 lbs. The shank is about 25 lbs. The ball itself would be 3 lbs. Each spring bar is about 12 lbs apiece.

view full answer...

Answer 10

Generally, switching to a weight distribution hitch with anti-sway built in is going to provide a much better towing experience; you're also going to find that these combined systems like the Fastway E2 #FA94-00-0600 will allow you to backup…

view full answer...

Answer 11

When choosing a weight distribution system, you will want to select one that encompasses the tongue weight of the trailer when fully loaded. This weight is usually between 10 to 15 percent of the GTW weight. You could also use the Reese system…

view full answer...

Answer 12

Your camper is not too light for a weight distribution system and the Reese Pro Round Bar Weight Distribution item #RE34FR will work on your trailer. This system works with trailer's that have a tongue weight between 200 lbs and 600 lbs. The…

view full answer...

Recommended Weight Distribution System for a 3,000 lbs Trailer

Continue Researching