2 inch Hitch Adapter for Swagman XC Bike Rack

Question

Question:

Will this sleeve work for our Swagman XC bike rack?

asked by: Theresa D

0

Expert Reply:

For the Swagman XC bike rack part # S64650 that you referenced the correct replacement 2 inch hitch adapter is the part # SP323. The Yakima adapter you mentioned would not work as it only fits Yakima racks.

expert reply by: Jameson C

0

Answer 1

Hey Nelson, welcome back. Yes! We have just the thing. To use your Yakima OnRamp LX with the 1-1/4" shank with a 2" hitch you will need the following: - Replacement 2" Shank for Yakima OnRamp LX Bike Racks #Y89GC This will replace the…

view full answer...

Answer 2

Hey William, congrats on your new bike rack. To use the 1-1/4" Yakima StageTwo Bike Rack with a 2" hitch, I recommend the Trailer Hitch Reducer 2" to 1-1/4" item #e63YR. This reducer sleeve will insert directly into your 2"…

view full answer...

Answer 3

We can get a 1-1/4 hitch accessory in a 2 inch hitch without modifying the accessory. Use this hitch reducer #HT02 to convert your 2" hitch to a 1-1/4" hitch. You cant use the RockyMounts adapter sleeve #RKY54FR is because the shank does…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 8

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 9

Hello Sam; that is a great question! I reached out to Furrion and you will be able to use the Furrion Chill Cube #FR69TD (white) or #FR49TD (black) with your furnace. However, the remote is not capable of operating the furnace at this time. Also, we…

view full answer...

Answer 10

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Answer 11

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 12

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

2 inch Hitch Adapter for Swagman XC Bike Rack

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching