Does Demco Towed Vehicle Battery Charge Kit part # DM66VR Fit Only Demco Towing Setups

Question

Question:

I have a 2013 jeep wrangler and want to know if I can use this kit just to maintain my tow vehicle battery while traveling, or does this only work with a Demco system.

asked by: Mark F

1

Helpful Expert Reply:

You could use the Demco Towed Vehicle Battery Charge Kit part # DM66VR on your 2013 Jeep Wrangler regardless of what flat towing setup you have since it's design is universal.

expert reply by: Jameson C

1

Answer 1

Hey Glenn, I attached a link down below that is an install video for the Demco Stay In Play Duo part #SM99251 on a similar 2018 Ford F-150. You can see where we attached all of the parts of it. You might have to scroll down pretty far to find it but…

view full answer...

Answer 2

Your 2018 Ford F-150 has an electric speedometer and should not record mileage if the ignition is off. That said if they used a braking system like the Brake Buddy Select 3 #HM39524 that requires power to the 12 volt outlet and they did not install a…

view full answer...

Answer 3

Yes, you can use the Towed Vehicle Battery Charge Wire Kit #DM66VR on your 2014 Honda CR-V. This will protect your battery from becoming damaged as it will connect to the charging circuit on your motorhome. It has a 10 amp fuse and diode that ensures…

view full answer...

Answer 4

It's a good idea to have both sides of the 12V power circuit connected so for your application I recommend using the Roadmaster Battery Charge Line Kit #RM-156-75 which includes an auto-reset circuit breaker for your motorhome and then the fuse…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 10

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 11

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 12

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Does Demco Towed Vehicle Battery Charge Kit part # DM66VR Fit Only Demco Towing Setups

Product Page this Question was Asked From

Continue Researching