Weight of Dexstar Steel Directional Trailer Wheel AM20259

Question

Question:

I have Dexstar Steel Directional Trailer Wheel - 13 inch x 4-1/2 inch Rim - 5 on 4-1/2 - Silver Item # AM20259 How much does this wheel weight ?

asked by: Robert

1

Helpful Expert Reply:

The weight of the Dexstar Steel Directional Trailer Wheel - 13" x 4-1/2" Rim - 5 on 4-1/2 - Silver # AM20259 is 13 lbs.

expert reply by: Kyle S

1

Answer 1

The highest rated gas shock absorber we offer is the JR Products Gas Shock part #372-2300-150 which measures 20" extended and 1.41" compressed or part #372-7145 which measures 26.32" extended and 15.82" compressed. These shocks…

view full answer...

Answer 2

Oddly enough for the directional trailer wheels we carry such as #AM20259 there isn't a left and a right. There is just the one so if you were to use 2 of them the appearances of them would not match unless you had more than one axle. Then they…

view full answer...

Answer 3

Looking at your picture we have a wheel that's close but I'm not sure it's exact. Directional wheels aren't all that common on trailres but we have part #AM20259 which is a Dexstar steel wheel with a 5 on 4-1/2 bolt pattern. It looks…

view full answer...

Answer 4

The 5 means that the wheel is 5 inches wide from bead to bead (not overall width). The J indicates the design of the wheel bead seat but it is nothing you need to be concerned with as this is the most common shape for all trailer tires. To measure…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 8

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 9

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 10

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6 inch whereas the 225/75-15 fits widths that are 5 inch to 6-1/2 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 11

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 12

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Weight of Dexstar Steel Directional Trailer Wheel AM20259

Product Page this Question was Asked From

Continue Researching