Will MORryde Suspension Upgrade Kit for Tandem Axle Trailers # MR58ZR Fit with EquaFlex

Question

Question:

I have a 2019 Grand Design Solitude 380FL. It came with the Lippert Equaflex suspension with 2 1/4 inch shackles. Will this upgrade kit work for me?

asked by: Mike B

0

Expert Reply:

Yes the MORryde Suspension Upgrade Kit for Tandem Axle Trailers # MR58ZR will work with your Equaflex system as it provides you with the same 2-1/4 inch long shackles as well as all of the other standard components needed that would match what you have now.

expert reply by: Jameson C

0

Answer 1

Hey Joe, long time no see haha! So if you wanted the best cushioned equalizer for a 33 inch wheelbase the MORryde Alltrek 4000 kit part #MR89DR would be what you'd want. This is only option that has vertical and horizontal cushioning so it's…

view full answer...

Answer 2

I believe you are referencing our 6k double-eye leaf springs, the 4-leaf, 25-1/8" long #e47SR and 5-leaf, 25-1/4" long #e34SR. The number of leaves won't make a huge difference, but fewer leaves can give you a slightly softer ride. So…

view full answer...

Answer 3

The number of leaves on a leaf spring does not dictate strength or capacity, so as you said, a 3000lb rated leaf spring (6,000lb axle capacity) can have various numbers of leaves since it is up to how the manufacture designed it. I wouldn't look…

view full answer...

Answer 4

The Equa-Flex Cushioned Equalizers are not adjustable for ride height. When this kit is installed, it gives the trailer about a 3 inch taller ride height. With the Equa-Flex Equalizers installed you're going to need to find a different way to tow…

view full answer...

Answer 5

Ff the springs you are installing are 25-1/4 inches, you would need to place the hangers between 24-3/4 and 25 inches apart. The shackle should be angled as the drawing shows in the attached helpful article, which should be toward the rear of the…

view full answer...

Answer 6

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 7

You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…

view full answer...

Answer 8

Hey Ian, great to hear from you again! The differences between the MORryde CRE3000 #MR87ZR and AllTrek 4000 #MR89DR that fit a 33" wheelbase is the height between the hanger and equalizer bolts, and the amount of travel the suspension style will…

view full answer...

Answer 9

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

view full answer...

Answer 12

Hi Chas, The Lippert Road Armor Shock Absorbing Equalizer part #LC53CK may work for your trailer, but that will depend on what equalizer is currently on your trailer. In order to determine what equalizers would be a fit for your trailer, we'll…

view full answer...

Will MORryde Suspension Upgrade Kit for Tandem Axle Trailers # MR58ZR Fit with EquaFlex

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching