Result: trailer connector

Hey Mason, To mount your 12" electric brake assemblies you would need the Mounting Bolts and Hardware for 12" Brake Assemblies #BRKH12.

To replace your 12" brakes I recommend checking out the 7K TruRyde Electric Trailer Brake Kit #TRU96FR or the 5.2K - 7K Hydraulic Trailer Brake Kit #AKUBRK-7 depending on what kind of braking system you have. You'll also need the Mounting…

The method you described would be a great way to determine what length to cut the #H20046. That way you would end up with enough wire that it wouldn't come unplugged when making a tight turn. Securing the wire up and out of the way is a smart…

With having 22'6" from your tail light location to the tongue on your trailer I recommend going with at least a 30' wiring harness. The additional length is needed so you will be able to route your wiring on the frame to the lights and…

When replacing shackle straps they should be the same length as the ones that were previously on your tandem axle trailer (if possible); replacing them with longer straps will result in additional play in your trailer suspension which could lead to…

Well shackle length is mainly based on the height difference between the front and rear hangers. The rear hanger normally doesn't hang as low as the front so that the shackle can offset the difference and add the ability to move. What is the…

So you have added a 7-Way trailer connector to your truck and now you want to add one to the trailer. There are a couple of options that you could employ. First, you could just use a 7-Way trailer connector only such as #PK12706, no wiring, and…

The three transmission coolers are basically the same cooler in different sizes. They're the same width (11 inches) and depth (7/8 inches) but they're different heights: #D13501 is 5-3/4 inches tall #D13502 is 7-1/4 inches tall #D13503 is…

Trailer running lights not working with certain Nissan vehicles is a common problem with an easy fix. There is a relay for the trailer running light circuit that is located in the fuse box (in the cab). If that relay is missing or no longer functions…

The trailer wiring harness options we have for a 2007 Honda Ridgeline all have built-in protection to isolate itself from the vehicle in the event of a fault. That said, the best one we offer is the T-One Vehicle Wiring Harness with 4-Pole Flat…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Yes, it will! However, the Hellwig item #HE66XR is not the strongest sway bar for your 2024 Chevy Silverado 3500 dually. Instead, I recommend the Roadmaster Rear Anti-Sway Bar item #RM25FR. It's a quarter inch thicker bar and does a way better…