Does the Exhaust Need to be Modified To install the Draw-Tite 75549 on a 2020 Sprinter 2500?

Question

Question:

can this be easily installed with a rear exhaust as attached. I see one pic that someone did install it, but looks like they might have cut it? We have a v6 3.0 diesel 2020

asked by: Faheem H

0

Expert Reply:

I can definitely say the Draw-Tite # 75549 will fit your 2020 Mercedes-Bens 2500. It also looks like the stock exhaust will not need to be modified for the install. I included an install video we did on a 2016 Sprinter for you to take a look at as well. There was no trimming or anything required and did just bolt right to the frame.

expert reply by: Lazer S

0

Answer 1

Hey Rick, thanks for reaching out! The Draw-Tite Max-Frame Trailer Hitch Receiver #75549 fits with the standard bumper on your 2022 Mercedes-Benz Sprinter 2500. The only alternative would be the factory step bumper, which works with the Draw-Tite…

view full answer...

Answer 2

Yes, the Draw Tite hitch part #75549 does fit your 2017 Mercedes Sprinter 2500 passenger van without the rear step and the frame width 39-1/2 inches that you mentioned.

view full answer...

Answer 3

The only trailer hitch that we currently offer that will fit a 2021 Mercedes-Benz Sprinter 2500 passenger van is the Draw-Tite Max-Frame Trailer Hitch Receiver #75549. This hitch does not fit models with a 30-3/8" frame, measured from outside to…

view full answer...

Answer 4

Hey Pablo, If your 2020 Mercedes-Benz Sprinter 2500 has a 144" or 170" wheelbase with a standard bumper you'll need the Draw-Tite Max-Frame Trailer Hitch Receiver #75549. If you have a 144" or 170" wheelbase with a factory…

view full answer...

Answer 5

We haven't had the chance to install both the Curt #C13388 and Draw-Tite #75549 trailer hitches on the Mercedes Sprinter to do a comparison, however I did go out to our warehouse to take a measurement on each to determine which will sit higher…

view full answer...

Answer 6

For your 2021 Mercedes-Benz Sprinter 2500 with the standard bumper, the Curt #C13388 and the Draw-Tite #75549. While we have not had a chance to install both of these hitches yet, when we measured these hitches we found that from the center of the…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 10

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 11

Hey Adrian! The higher capacity for the B&W #BW47BR and Curt #C77MJ comes from the construction. The B&W hitch weighs 45 lbs and then the Curt and Trailer Mate #TMT54FR both weigh 32 lbs. The Trailer Mate does sit just a tad higher compared…

view full answer...

Answer 12

Though the Curt # C13409 and Draw-Tite #76271 are nearly identical to each other, there are a few subtle differences. First being where they sit once installed. The will both have the exact same height of 14-1/2 inches, but the Draw-Tite #76271 will…

view full answer...

Does the Exhaust Need to be Modified To install the Draw-Tite 75549 on a 2020 Sprinter 2500?

Featured Help Information

Miscellaneous Media

Continue Researching