Recommended Trailer Hitch Receiver For 2021 Kia Sorento

Question

Question:

Will this work on a 2021 Sorento? Are they same as the 2020 Sorentos?

asked by: Chris D

0

Expert Reply:

I have another option for you, but the etrailer Trailer Hitch Receiver # e98843 for a 2020 Kia Sorrento will not fit your 2021 Kia Sorento as they use different mounting locations due to differences in the frame.

For your 2021 Kia Sorento I recommend the Curt Trailer Hitch Receiver # C34ER which has a 600lb tongue weight rating and 4000lb trailer weight rating making it a great option for towing a trailer, carrying a bike rack, or carrying a cargo carrier.

If you are planning on towing a trailer you will also need a vehicle wiring harness # TK26FR and a hitch ball, ball mount, and hitch pin and clip which can all be found in the etrailer Ball Mount Kit # 989900.

I included the written instructions of the # C34FR and # TK26FR and a video review of the # 989900 for you to take a look at.

expert reply by: Samuel C

0

Answer 1

The maximum tongue weight capacity for a 2020 Kia Sorento V6 is 350 lbs. This is the figure provided in the owner's manual so that is the bottom line. The trailer hitch options for this vehicle do offer tongue weight capacities greater than 350…

view full answer...

Answer 2

For your 2008 Kia Sorento the correct hitch for your vehicle would be the Draw-Tite part #75516. The #75684 that you referenced is for newer Sorentos so it would not work for you. For trailer wiring you would want the Curt Wiring Harness part…

view full answer...

Answer 3

The Curt Trailer Hitch Receiver #C13073 you were looking at is confirmed to fit all models of the 2012 Kia Sorento, and will fit perfectly on your 2012 Kia Sorento EX 4 cylinder. This is a great choice as it gives you a 2" trailer hitch receiver…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Hey Dean, thanks for reaching out! The Rola Swinging Carrier 59109 was discontinued back in 2021 which is why you aren't finding the product on our site. For a similar carrier I recommend checking out the Yakima EXO Swing Away Enclosed Cargo…

view full answer...

Answer 6

Hello Anton, thanks for reaching out. For your 2019 Kia Sorrento I recommend the etrailer Class 3 Hitch #e98843. This has a 2" receiver, 5,000 ls towing capacity and 750 lb tongue weight capacity. Install video and instructions are linked for…

view full answer...

Answer 7

I recommend going with a hitch mounted bike rack that attaches to a swing away system because of ease of use and potential clearance issues. If your 2020 Hyundai Sante Fe doesn't already have a hitch receiver the Curt Trailer Hitch Receiver item…

view full answer...

Answer 8

In order to tow a trailer with a 2019 Hyundai Santa Fe you'll first need to start with a trailer hitch and for this I recommend the etrailer Trailer Hitch Receiver part #e98843 which offers a direct bolt-on fit. It has a 2" opening with…

view full answer...

Answer 9

Absolutely, you can check just behind the rear tire on the driver's side of your 2019 Kia Sorento, on the outside of the frame rail. The factory connector, if present, will look like the one in the attached photo (B). Note that you will need to…

view full answer...

Answer 10

Hey Jeff, The T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #118784 is only for Santa Fe models with the factory towing package. If yours does not have this then you would need the splice-in Curt Powered Tail Light Converter with…

view full answer...