Difference Between Hopkins 37185 and 47185 4-Pole to 7-Way Trailer Connector Adapters
Updated 05/24/2024 | Published 06/02/2021
Question:
I am converting my 4-pin to 7 pin on my 2005 F-150 Crew Cab. Will part#47185 work or should I stick with part #37185? Thanks
asked by: John B
Expert Reply:
The part we offer as # 37185 is actually sold by Hopkins as part # 47185 so it's the same exact part. Your truck is prewired for a brake controller installation, but the wiring isn't ran all the way to the bumper. The wiring stops on the driver's side frame rail.
Follow your 4 pole connector to where it plugs into the body harness on the frame rail. The harness feeding that connector from the front of the vehicle will have an orange wire that carries 12-v for trailer accessories and the blue wire for the brake controller output. The blue wire in that harness would connect with the blue wire on the # 37185 adapter, and the black adapter wire connects to the orange wire in the body harness. I'll link to a help article that explains this further.
I've also linked to a video showing a typical installation, which you might find helpful.
Product Page this Question was Asked From
Adapter 4-Pole to 7-Pole and 4-Pole
- Custom Fit Vehicle Wiring
- Wiring Adapters
- Universal Fit
- 4 Flat to 7 Blade
- Plug and Lead
- Hopkins
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Brake Controller
- Shop: Trailer Wiring
- Shop: Adapter 4-Pole to 7-Pole and 4-Pole
- Shop: Tekonsha Prodigy P3 Trailer Brake Controller w/ Custom Harness - Up to 4 Axles - Proportional
- Shop: Towed Vehicle Battery Charge Line Kit for Demco Air Force One and Stay-IN-Play Duo Braking Systems
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Shop: Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - Ford, Lincoln, Mercury
- Shop: Trailer Hitch
- Shop: 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End
- Shop: Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Shop: Tonneau Cover
- Q&A: Is there a Difference Between Prodigy P2 90885 and 90885C Brake Controller
- Search Results: 37185
- Search Results: 47185
- Search Results: hopkins 47185 multi tow adapter
- Video: Detailed Breakdown of the Buyers Products Trailer Connector Adapter
- Video: In-Depth Review of the Universal Installation Kit for Trailer Brake Controller
- Video: DIY Install: Adapter 4-Pole to 7-Pole and 4-Pole on your 2011 Ford Van
- Video: How to Install: Adapter 4-Pole to 7-Pole and 4-Pole on your 2009 Ford Van
- Search Results: tekonsha 3035~p
- Search Results: tekonsha p3
- Search Results: wire
- Search Results: trailer wiring
- Video: Let’s Check Out the Curt Universal Installation Kit for Trailer Brake Controller
- Video: Best 2008 Ford Van Custom Fit Vehicle Wiring Options
- Shop: Front Mount Hitch
- Q&A: Parts Needed To Install a 7-Way and Trailer Brake Controller On a 1996 Ford F-350 With Factory 4-Way
- Shop: Base Plate for Tow Bar
- Shop: Vehicle Tow Bar Wiring
- Video: Comprehensive Review: Dometic FanTastic Ultra Breeze Trailer Roof Vent Cover
on Custom Fit Vehicle Wiring
Brian
5/24/2024
Hi Mike - 1996 ford f350 reg cab dually 7.5l gas w/ Factory tow package and 4 pin tow connector. 4 pin works great. Found the yellow 12v you refer to on the driver frame rail at the rear of truck but it has no power. The 30A fuse in slot 18 is good. Anything else I should check? Or do you have any articles you'd suggest? Also, where to hook 7 pin into truck if factory blue isnt powered? Thanks!