K-Source # KS69ZR Replacement Straps

Question

Question:

I purchased these from you in 2017. One of the straps has broken, Can they be replaced?

asked by: Vincent R

0

Expert Reply:

The replacement straps for your K-Source # KS69ZR mirror is K-Source # KS99FR straps. Comes with strap and buckle.

expert reply by: Les D

0

Answer 1

I recommend the K-Source Universal Towing Mirrors #KS69ZR for your 2020 Subaru Outback. These mirrors have a simple strap system and is not overly complicated. The arms are adjustable allowing you to position them in the correct orientation to match…

view full answer...

Answer 2

The Replacement Ratcheting Straps for K-Source Universal Towing Mirror - Clip On - Qty 2 #KS3891STR and the Replacement Ratcheting Straps for K-Source Universal Towing Mirror - Clip On - Qty 2 #KS99FR will fit the Universal Towing Mirrors. The stores…

view full answer...

Answer 3

As long as you have the hole to install the 1-1/4" ball for the Curt #17200 on your head it will fit. This portion of the weight distribution hitch head sticks out to the side on the top. The friction control sits up above the spring bars which…

view full answer...

Answer 4

The B&W Continuum Weight Distribution System part #BW78FR per B&W, does have built-in sway control. That said, all weight distribution systems have some sway control as they provide friction at the connection point which will then in turn…

view full answer...

Answer 5

The B and W Continuum #BW78FR weights 55 lbs but this does not count against the tongue weight capacity of your hitch. B and W states that this essentially becomes a part of the vehicle hitch so it's additional weight does not need to get…

view full answer...

Answer 6

The overall weight of the Blue Ox SwayPro Weight Distribution w/ Sway Control part #BXW1000 is around 88 lbs. in the box. When using the system about 20 lbs. of that will be hanging on the trailer with the rotating lift brackets and another 15 will…

view full answer...

Answer 7

Hello Chris, thanks for reaching out. The B&W Continuum Weight Distribution System #BW78FR uses a unique shank, part #BW48FR, which is different from other weight distribution systems. There is no other compatible shank available, so…

view full answer...

Answer 8

The B&W Continuum Weight Distribution System part #BW78FR is a great system but so is the Blue Ox SwayPro Weight Distribution System like part #BXW1006. In regards to ease of use, the B&W gets the edge as setting the spring bar tension is…

view full answer...

Answer 9

The B&W Continuum Weight Distribution System part #BW78FR requires at least 24" of space on the frame directly behind the coupler and along the side a few inches back from there. This works with most trailers but for some it will not and,…

view full answer...

Answer 10

The B&W Continuum Weight Distribution System item #BW78FR weighs 116 lbs. The weight of the weight distribution system does not get added to your trailer's tongue weight. I have linked a review video below so you can see the features of this…

view full answer...

Answer 11

I can certainly point you in the right direction here. I will stary by saying that after looking over pictures of the 2024 Airstream 30RB, I have concerns about the placement of the propane tanks on the tongue. In order to use the B&W Continuum…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

K-Source # KS69ZR Replacement Straps

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching