Will Spindle Grease Seal Set # BB60011 Work With EZ Lube Spindle
Updated 08/23/2013 | Published 08/20/2013
Question:
Will part # BB60011 work on an EZ Lube Spindle?
asked by: Xavier
Helpful Expert Reply:
The Spindle Grease Seal Set, part # BB60011, can be used on an EZ Lube Spindle provided you have correctly matched the seal and spindle dimensions.
The best way to determine what seals would work for you is to match your existing seals based on their part number. Please refer to the photo provided that shows the typical location for the part number on both grease seals and bearings.
In case you cannot locate the existing part numbers, I have also attached a drawing that shows the places to measure on the spindle to make certain you match the seals you need. It is not reliable to measure the old seals as they often change shape with age and may be slightly deformed when removed from your spindles. Measuring the spindle is a better method. A precision digital caliper is required to take accurate measurements.
I have also included a help article showing how to pack and install bearings and seals and I have linked you to our main product page for seals.
Product Page this Question was Asked From
Spindle Grease Seal Set for 25580 Inner Bearing and 2.441 Bearing Buddy
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 2.38 Inch I.D.
- 3.37 Inch O.D.
- Bearing Buddy
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: bearing buddy
- Shop: Spindle Grease Seal Set for 25580 Inner Bearing and 2.441 Bearing Buddy
- Video: Replacement Rubber Bushing for Kodiak Guide Bolt Sleeve Spec Review
- Shop: Hydraulic Trailer Brake Kit - Uni-Servo - 12" - Left and Right Hand Assemblies - 5.2K to 7K
- Search Results: 2441
- Article: How to Bleed Your Trailer Surge Brakes
- Search Results: hub cap
- Search Results: seal
- Search Results: axle nut
- Search Results: spindle nut
- Search Results: trailer bearings races seals caps
- Shop: Off Road Lights
- Video: Spindle Grease Seal Set for L44643 Inner Bearing and 1.980 Bearing Buddy Spec Review
- Shop: Dexter Bearing Kit, 15123/ 25580 Bearings, 10-36 Seal
- Video: Hydraulic Brake Kit Feature Review
- Video: Feature Review Bearing Buddy Bearing Protectors-BB67SR
- Video: The Low-Down on the Hydraulic Brake Kit
- Shop: Spindle Grease Seal Set for L68149 Inner Bearing and 1.810 Bearing Buddy
- Shop: Replacement Rubber Bushing for Kodiak Guide Bolt Sleeve - ABS Compatible - 2,000 lbs - 8,000 lbs
- Shop: Dutton-Lainson Hand Winch Strap
- Shop: Kodiak Disc Brake Caliper Rebuild Kit for 3,500 lb to 6,000 lb Trailer Brakes
- Q&A: Trailer Hub Replacement Recommendation for Hub Marked # HD-1206
- Q&A: Replacement Hub and Drum Assembly For Older Drum Marked HD-1206
- Q&A: Converting Standard 7K Grease Hubs to Oil Bath Hubs
- Q&A: Can Regular Grease Trailer Hubs be Converted to Oil Bath Hubs
- Video: What to Know About the Dexter Trailer Hub and Drum Assembly
- Q&A: Replacement Stainless Steel Kodiak Trailer Brake Kit For 6,000LB Axle With 6 On 5-1/2 Bolt Pattern
- Q&A: What is the Difference Between the 10-10 Grease Seals and the 10-36 Grease Seals
- Q&A: Determining Correct Replacement Oil Bath Hub For 2003 Mastercraft Single Axle Trailer
- Shop: RV Plug Adapters