Towing Capacity of Bulldog Collar-Lok Adjustable Channel Mount Coupler Part # BD028657

Question

Question:

what is capacity of this coupler and is the hardware included?

asked by: patti

0

Expert Reply:

The Bulldog Collar-Lok Adjustable Channel Mount Coupler # BD028657 is rated for 15,000 pounds and it does include the mounting hardware shown in the pictures. This coupler fits a 2-5/16-inch ball and mounts to 2-7/8-inch wide channel brackets.

expert reply by: Adam R

0

Answer 1

I do have a potential solution for you, but we do not have a sleeve-lock style coupler rated for 16K or higher. If you are in need of a channel mount coupler for a 2-5/16" ball, we have the #DM15791-81. This will fit in a 3" wide channel…

view full answer...

Answer 2

First I want to make sure you verify your channel mount for the Demco Trailer Coupler #DM14040-81 has a 21K or larger capacity as often times they are less like the Demco #DM15349-52 which often times people look at and think it is a channel mount…

view full answer...

Answer 3

I had a similar question as this and spoke to Bulldog and they said that the capacity for their couplers like the part #BD028657 that you referenced can only be guaranteed if the mounting bracket is tight against a channel. If there is a gap you will…

view full answer...

Answer 4

Bulldog Collar-Lok Coupler #BD028287 and similar couplers have a sleeve that constantly puts pressure on the front of the coupler, the part that goes around the ball, so that it cannot come loose. There is also more surface area of the coupler making…

view full answer...

Answer 5

You certainly can use the Trimax Coupler lock #TMX47FR with the Demco 2-5/16" Ez latch coupler like the #DM14040-81. The Demco coupler is 2-7/8" wide on the outside so it will undoubtedly fit with the Trimax lock, which is more or less…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 11

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 12

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Towing Capacity of Bulldog Collar-Lok Adjustable Channel Mount Coupler Part # BD028657

Continue Researching