What to Know About the Lippert Tandem Axle Equa-Flex AP Kit Video

Your Dexter D44 Axle number 635096 uses the Trailer Hub and Drum Assembly #8-407-5UC3-EZ that comes preloaded with the Races #LM67010 and #L68111. It does include the Bearings #L68149 and #LM67048, Grease Seal #58846, Grease Cap #21-42-1 and lug…

The bump stop of your 2020 Chevy Silverado 2500 actually is not held in with a bolt and to remove it you would just need to pry it out.

You could potentially replace your leaf springs with a larger capacity spring but will need to match the length of your current leaf springs to avoid having to remove and reinstall the hangers and rest of the suspension system, which is a giant…

The Bronze Bushings part #K71-291-00 that you referenced does fit the standard leaf spring dimensions like what a Dexter 8k leaf spring would have.

The term, wet, in this case means that the head of the bolt has a grease Zerk in it and there is a channel that leads to center of the bolt. This makes it easy to grease the bolt while installed, as you can put a grease gun right up to the Zerk and…

Since you have a 7-3/4" equalizer you are going to want to use the Dexter Heavy-Duty Suspension Kit #K71-449-00 you found. While most trailers who use this size equalizer will have a 35" axle spacing it is more important to match the…

From what I can see your Keystone trailer has a pair of 3,500 lb axles so to upgrade to 5,200 lb axles you'd need the axles, U-bolts, and hubs. In order to choose the correct replacement axle for your trailer you will need to know the dimensions…

From the measurements you provided, the Lippert Road Armor #LC696740 is going to be the better option. You will also need the #LC64FR to complete it. This will include wet bolts and all shackles, but they will be a little shorter at 3 1/8 inches.

Hey Tom, your best solution is the MORryde AllTrek 4000 part #MR89DR which very closely matches the dimensions of the equalizer you have now and has the best cushioning out there since it cushions both vertically and horizontally. Check out the…

I wasn't able to find any specific information on your 2015 AML Auto Hauler open trailer with tandem 5,200 lbs axles current suspensions. There isn't a database I can look at and tell you exactly what part number you will need. The Lippert…

In order to get the correct replacement springs (as you need to replace springs in pairs for any given axle) I'll need you to lift the trailer by the frame so the leaf spring is relaxed, and then measure from the center of one bolt hole to the…

The shackle straps included in the Lippert Tandem Axle Equa-Flex AP Kit - Wet Bolts - 3-1/8" Long Shackles #LC64FR you mentioned are 3-1/8" center to center and 4-3/8" overall length as shown in included diagram. Using the longer…