Dexter Heavy Duty Equalizer Suspension Kit for Trailer with 34 inch Wheelbase

Question

Question:

I have a tandem trailer that is 34 between axels. Looking for a suspension kit for tandem axel trailer. What do you recommend for this type of trailer? The leaf springs are 1 3/4 and center hanger is 4 1/2.

asked by: Dana

0

Expert Reply:

Your trailer's wheelbase is a dimension that is compatible with the Dexter Heavy Duty Suspension kit part # K71-359-00 that you referenced so this would be a great option. The equalizers are a little wider than what you have but the shackle length of what comes with this kit would compensate for that.

expert reply by: Jameson C

0

Answer 1

Based on the measurements you have given, the correct kit would be the #K71-657-00 Dexter E-Z Flex Suspension Kit - Double-Eye Springs - Triple Axle - 8,000 lbs. You want to use the short equalizers. The hangers you have are designed for the…

view full answer...

Answer 2

The Dexter Heavy Duty Suspension Kit #K71-360-00 is designed for 33" axle spacing. Since your current spacing is 34" this kit should fit just fine with your current hanger spacing. I have attached a picture showing what this kit should look…

view full answer...

Answer 3

I would be happy to help! When measuring for new leaf springs you need to either take them off of the trailer, or jack up the side of the trailer so that the axle is not carrying any weight. Based on the pictures of the leaf springs on your 2017…

view full answer...

Answer 4

Hey Clint, the Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers #K71-449-00 that you referenced would work really well for you. The equalizers are the same dimensions and the shackle straps are close enough to what you have that they would…

view full answer...

Answer 5

Hello Jason. Generally, we do want the shackle size to be an exact match, but a difference of 3/8" should not be an issue. There is a bit of tolerance when replacing shackles but anything less than 1/2" is considered acceptable. The MORryde…

view full answer...

Answer 6

The best set of air bags for your 2024 Chevy Silverado 2500, that are compatible with an in bed hitch, are the Firestone Ride-Rite Air Helper Springs item #F2613. These air bags have a 5,000 lbs capacity that will level out the rear end of your…

view full answer...

Answer 7

If there is a tiny bit of play in suspension components that are designed to move you would be fine. 1/16 of an inch isn't very much, and as long as you torqued everything down to spec you would be good to go. Ideally we just don't want it…

view full answer...

Answer 8

I would be happy to help you find the correct wet bolt kit, but unfortunately that is not something that can be determined by the serial number of the axle. Instead you will need to measure one of your current bolts. Typically these bolts are…

view full answer...

Answer 9

If you used the Dexter Equalizer kit part #K71-359-00 that you referenced the distance between the axles would be 33 inches.

view full answer...

Answer 10

Hi Jack, The 33" or 35" spacing is measured from the center of one axle to the center of the other axle (measurement C in diagram). If this isn't a new build and your just replacing suspension components then I'd recommend measuring…

view full answer...

Answer 11

Hey Martin, thanks for all the specs on your Keystone suspension! Based on that I can confirm that the Dexter suspension upgrade kit part #K71-359-00 that you referenced does fit. The big determining factor was the width of your current equalizers…

view full answer...

Answer 12

For your 34" axle spacing you won't have any issue using just the hardware included with the Dexter Heavy-Duty Suspension Kit #K71-359-00 with your existing equalizers. If you take a look at the install video I attached below, we actually…

view full answer...

Dexter Heavy Duty Equalizer Suspension Kit for Trailer with 34 inch Wheelbase

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching