Will TruXedo Replacement Bulkhead Seal TX99FR Work With Spray-In Bed Liner

Question

Question:

With this seal stick to a spray in bed liner?? I just had a rhino liner installed and need a new seal.

asked by: Michael R

0

Expert Reply:

Yes it will; the Replacement Bulkhead Seal for TruXedo Lo Pro or TruXport Tonneau Covers # TX99FR will indeed stick to your spray-in bed liner.

I have added a link below to a video review for you to check out as well of the Replacement Bulkhead Seal # TX99FR.

expert reply by: Kyle S

0

Answer 1

Hi Tim, We do have the tapered rubber seals for the TruXedo Lo Pro tonneau cover, which is the Replacement TruXedo Tapered Weather Seal for Lo Pro Tonneau Covers #TX1114731. This is sold in increments of one foot, so if you need two feet of seal, for…

view full answer...

Answer 2

The Draw-Tite Hitch, #24847, and the Hidden Hitch Trailer Hitch, #60263 (no longer available), are basically the same hitch so they both have the same ground clearance and side profile. Draw-Tite and Hidden Hitch are sister companies that use the…

view full answer...

Answer 3

Hey Richard, You're correct, the Replacement Bulkhead Seal #TX99FR is foam. I checked with TruXedo and our other manufacturers and there isn't a replacement rubber seal, the only option is the foam they offer.

view full answer...

Answer 4

Thanks for coming and asking about the power watchdog. **Portable Power Watchdog Surge Protector with Bluetooth and Emergency Shut Down - 50 Amp #HU87FR. Yes the light on the face of the surge protector can be considered very bright to some users. I…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 12

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Will TruXedo Replacement Bulkhead Seal TX99FR Work With Spray-In Bed Liner

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching