Replacement Rubber Seals For TruXedo Lo Pro Tonneau Cover

Question

Question:

Hi, I have to replace my Truxedo lo pro qt roll up cover. the code stamped on the tarp is 5706 11-03-08. I believe that is your part number TX1117930. I also need the rubber seals for the front and back as the rear one is ripped and lets water in. Do you have those also? Thanks Tim

asked by: Tim M

0

Expert Reply:

Hi Tim,

We do have the tapered rubber seals for the TruXedo Lo Pro tonneau cover, which is the Replacement TruXedo Tapered Weather Seal for Lo Pro Tonneau Covers # TX1114731.

This is sold in increments of one foot, so if you need two feet of seal, for example, you'd put "2" in the "Quantity" box on the product page.

expert reply by: Kyle S

0

Answer 1

There is not a video out that shows you how to remove and replace the Replacement Header Seal for TruXedo Lo Pro Soft Roll-up Tonneau Cover #TX1704787 however it really is quite simple to do. All you're going to need to do is remove your current…

view full answer...

Answer 2

You are going to need the Replacement Rear Side Rail Plugs with Seals #TX62NV for TruXedo Pro X15 Tonneau Cover. These are different from the Endcaps #TX28TV for TruXedo LoPro Tonneau Covers.

view full answer...

Answer 3

We have replacement tonneau cover Velcro that is exactly 1-5/16 inches wide with the Truxedo part #TX1115174 which would fit your rails. It can be cut down shorter too as it is 80 inches long.

view full answer...

Answer 4

The part number for the weatherstripping you'll need is the #TX1706063 which is sold by the foot. For your cover you'd need to order a quantity of 5.5 feet.

view full answer...

Answer 5

Hey Jack! We've got two different replacement straps for the TruXedo Lo Pro tonneau covers. One is the 13" Replacement Safety Strap for TruXedo Lo Pro Soft Roll-up Tonneau Cover item #TX1118185. The other is an inch shorter, it's the…

view full answer...

Answer 6

Yes it will; the Replacement Bulkhead Seal for TruXedo Lo Pro or TruXport Tonneau Covers #TX99FR will indeed stick to your spray-in bed liner. I have added a link below to a video review for you to check out as well of the Replacement Bulkhead Seal…

view full answer...

Answer 7

The best method to identify the tonneau cover on your 2008 GMC Sierra will be to look for the date code and or serial number. The serial number is located on the driver's side of the front header on the TruXport frame. The date code is printed on…

view full answer...

Answer 8

Thanks for the information. I checked with TruXedo and to replace just the cover on your 2012 Ford F-150's 5-1/2' bed you will need the Replacement Cover for TruXedo Lo Pro Soft, Roll-up Tonneau Cover item #TX5671-CVR. You will want to put…

view full answer...

Answer 9

To ensure we get you all of the correct replacement parts for your TruXedo Lo Pro Qt tonneau cover #TX581101, I confirmed with my contact there the replacement vinyl, header seal and end plugs for the cover that fits your 1999 GMC Sierra 1500 with a…

view full answer...

Answer 10

Hi Lee; can you tell me which end cap it is based on the picture below? There are four possible options. Since you mentioned the foam I'm guessing it is either the Side Rail End Plug_RH Foam Seal or Side Rail End Plug_LH Foam Seal. The end caps…

view full answer...

Answer 11

I confirmed with TruXedo that the replacement front seal you need for your TruXedo Pro X15 #TX1497701 on your 2018 Ford F-150 (5-1/2 ft. bed) is the Replacement Bulkhead Seal for TruXedo Lo Pro or TruXport Tonneau Covers #TX99FR.

view full answer...

Answer 12

I spoke to Truxedo about the Truxedo X15 Tonneau Cover and they informed me that the correct replacement retainer straps for a truck with 8' bed is the Replacement Safety Straps for TruXedo Lo Pro and TruXedo Deuce Soft Roll-up Tonneau Cover part…

view full answer...

Replacement Rubber Seals For TruXedo Lo Pro Tonneau Cover

Product Page this Question was Asked From

Continue Researching