Solution for Towing Trailer with Separate LED Tail Lights
Updated 05/11/2021 | Published 05/10/2021 >
Products Featured in This Question
Question:
Hello, I have a boat trailer that has separate brake and blinker LED lights and need an adaptor to make them work on a four wire system. The vehicles I will be towing the boat with are a 2015 GMC Arcadia and a 2004 Chevrolet Tahoe. If this is not the correct unit can you please recommend what will best fit my applications. Thank you for your assistance.
asked by: Michael D
Expert Reply:
Since your trailer has LED taillights we don't have a converter that will work. Normally we recommend the part # C56196 but this does not work with LED bulbs.
Most likely have a converter already installed on the trailer wiring if it has been used before since combined is the normal trailer wiring on vehicles and trailers.
To go to a combined taillight assembly on your trailer you could also use the part # TLL160RK.
Continue Researching
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Shop: Trailer Wiring
- Video: Review of Tekonsha Custom Fit Vehicle Wiring - Trailer Hitch Wiring - 119192
- Video: Feature Breakdown: Jacketed 2 Wire (Brake Wire)
- Video: Hopkins Wiring - Trailer Connectors - HM46370 Review
- Shop: Vehicle Tow Bar Wiring
- Search Results: trailer brake controller
- Search Results: brake wire
- Shop: 12 Gauge 2 Conductor Jacketed (Brake) Wire Per Foot
- Shop: Optronics LED Trailer Light - Brake, Tail, Turn - Submersible - Oval - Red
- Shop: Trailer Light Mounting Bracket for 6-1/2" Oval Trailer Lights, Steel - Black Powder Coat
- Shop: Curt 4-Way Flat Trailer Connector with Circuit Protected Powered Tail Light Converter
- Search Results: 2 wire to 3 wire tail light converter
- Q&A: Brake Control Installation Instructions for a 1996 Chevrolet C/K Pickup
- Q&A: Can Hopkins Endurance Trailer Connector Adapter Just be Grounded and Other Wires Not Connected
- Q&A: Recommendation for Wiring a Camper to a 7-Way Wiring Connector
- Q&A: Installing a Trailer Brake Controller in 2007 Winnebago Freightliner Chassis and Factory Harness
- Q&A: What Size Wire Should be Used for Wiring the Blue and Black Brake Controller Wires
- Shop: Curt 2-to-3 Tail Light Converter for Towed Vehicles w/ Incandescent Tail Lights
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Shop: Roadmaster 6-Diode Universal Wiring Kit for Towed Vehicles with Separate Lighting
- Q&A: Wiring New 3 Wire Light on Trailer to Replace 2 Wire Light
- Q&A: Converting 7-Pole on 2018 Mack Dump Truck to 6-Pole for Trailer