Recommended 14 Trailer Wheel To Match Trailer Wheels On 2019 Road King Trailer

Question

Question:

I am trying to match the wheels on my 2019 Road King Trailer. ST 205/75R X 14 LRC. Please find attached a picture of the wheel. I'm almost positive I saw this on your site before, but can't find it now.

asked by: Nick W

0

Expert Reply:

Unfortunately, we no longer have the exact wheel you are looking for.

For a great looking similar wheel, take a look at the Aluminum Jaguar Trailer Wheel - 14" x 5-1/2" Rim - 5 on 4-1/2 - Gunmetal Gray # LHSJ211G which has the same capacities, size, and bolt pattern as the wheel in your picture, but is not the look.

For a tire I recommend the Castle Rock ST205/75R14 Radial Trailer Tire - Load Range C # LHCK201 which is the exact size and load rating you were looking for.

I included videos of both of the products mentioned for you to take a look at.

expert reply by: Samuel C

0

Customer Wheel On Road King Trailer
(click to enlarge)

Answer 1

Yes, you can replace your load range C tires with load range D tires without issue. It will only become any issue when you go down load ranges, not up. The tires will have the same overall diameter as long as they are the same size regardless of…

view full answer...

Answer 2

This type of question is always challenging due to the amount of varying opinions, different experiences, and lack of controlled environment with set standards. Please keep in mind that Castle Rock is an economy trailer tire so they will not perform…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 10

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 11

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 12

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Recommended 14 Trailer Wheel To Match Trailer Wheels On 2019 Road King Trailer

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching