Replacement Breakaway Switch Key for Demco Air Force One

Question

Question:

Replacement Breakaway Switch Key for Even Brake and Brake Pro Item # RM-200200-20 Looking for a black breakaway switch key for the unit that comes with Demco Airforce 1. Doesn’t need to work, but just needs to fit would use the supplied white key while towing. The black would blend in easier, when vehicle not being towed. Will this fit the Demco?

asked by: Mark G

0

Expert Reply:

We have the correct replacement breakaway switch pin for the Demco Air Force One with the part # SM99905 which isn't black but it is the correct and only replacement we can recommend.

expert reply by: Jameson C

0

Answer 1

Yes, the Replacement Breakaway Switch Pin #SM99905 is the correct part for your Demco SBS Stay-IN-Play DUO Supplemental Braking System #SM99251.

view full answer...

Answer 2

For the replacement pin you need the Replacement Breakaway Switch Pin for Demco SBS Supplemental Braking Systems #SM99905. This will work with the breakaway on your #SM99243. For the cable you can use the Roadmaster #RM-8603. The cable that came with…

view full answer...

Answer 3

Yes, the Roadmaster FuseMaster Fuse Bypass Switch part #RM76512 will work on your 2017 Buick Envision and is also recommended to be used while flat towing this vehicle. In order to flat tow your vehicle with 4 wheels down, you will need a base plate…

view full answer...

Answer 4

The Replacement Air Jumper #DM97ZR can be used as a replacement for the jumper that came in the Demco Air Force One Supplemental Braking System for Freightliner Chassis Motorhomes with BrakeSync #DM23MV that you previously purchased with us. The part…

view full answer...

Answer 5

Glad you got it all set up but that's interesting your Rambler's fitting is a different size. The Demco Air Force One item #DM23MV you purchased is specifically designed for the factory BrakeSync fittings. I don't know if yours got…

view full answer...

Answer 6

For your Roadmaster BlackHawk 2 All Terrain, Non-Binding Tow Bar - Motorhome Mount - 2" Hitch - 10K #RM-422 the fact that they are bound up obviously shows and issue. My recommendation for you is to completely remove the inner bar and replace it…

view full answer...

Answer 7

There are definitely some products that can help you with that. Roadmaster recommends using a dry silicone spray lubricant like #RM-747, as grease or WD-40 can actually cause dirt and debris to stick, making the problem worse. Before lubricating,…

view full answer...

Answer 8

It is recommended to keep the Breakaway Switch Pin #SM99905 in at all times with either the Stay-In-Play #DM86VR or Air Force One #DM26VR. The pin will not only protect the braking system from activating when not needed it also keeps the dirt and…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Replacement Breakaway Switch Key for Demco Air Force One

Product Page this Question was Asked From

Continue Researching