Is There A Way To Unmarry The Edge CTS3 Tuner From Your Vehicle

Updated 04/17/2024 | Published 04/24/2021

Question:

How to unmary from my truck

asked by: Erin D

Expert Reply:

I talked with the vendor about unmarrying the Edge CTS3 Tuner. You will need to go into the tune menu and look for 'return to stock' or 'backup'. This will walk you through the necessary steps to return your truck back to factory tune and unmarry the tuner from your truck.

If you wish to install the tuner on another vehicle then you will need to call Edge and give them the tuner's serial number and follow a few other steps then you will be all set.

expert reply by: Andrew N

Mike

4/17/2024

That don't unmarried the tuner.it will reset it to stock but not unmarry it

Andrew N.

4/17/2024

@Mike Yes, that is unfortunately correct. Aforementioned in the answer above, "if you wish to install the tuner on another vehicle then you will need to call Edge and give them the tuner's serial number and follow a few other steps then you will be all set"

Ask The Experts a Question >>

Video/Article/FAQ this Question was Asked From

Article or Video

Is There A Way To Unmarry The Edge CTS3 Tuner From Your Vehicle

Continue Researching