Correct 4" Diameter Trailer Tail Glo Lights

Question

Question:

It has been a while since I ordered Glo lights from you but would you have a record of my purchase? I lost 2 of the 4” tail lights and don’t know what the number is to reorder.

asked by: Bill G

0

Expert Reply:

I was able to confirm that what you're looking for is the GloLight LED Trailer Tail Light part # STL101RMB.

expert reply by: Conner L

0

Answer 1

Hey Loren. For the Optronics LED Trailer Light item #STL43RB you'll need the Rubber Grommet for 4" Round Trailer Lights item #A45GB. We also have this same light in Amber it's item #STL43A24B. What kind of trailer do you have?

view full answer...

Answer 2

The Optronics Trailer Light #STL43RB that you referenced can mount using rubber grommet #A45GB. But this light's overall diameter is 4-5/16-inches so this light unit would be too large to allow for grommet mounting in your trailer's…

view full answer...

Answer 3

Hi James; are you referring to the Optronics LED Trailer Light #STL43RB you were looking at? Are you using the Rubber Grommet for 4" Round Trailer Lights #A45GB or something else? The only other option we have is the Trailer Light Mounting…

view full answer...

Answer 4

I do have a solution for you, since the hole that you are placing the grommet in is 4.75 inches, the grommet that you referenced, the Optronics #A45GB, might push through that mounting hole since the overall diameter is 5-3/8. Depending on your exact…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Hey Melanie. The reason you can't find a replacement for your GE ARC15AACBL2 15,000 btu air conditioner is because they phased them out. In 2025 all RV AC systems had to change over to a new coolant called R32. This was a EPA mandated decision.…

view full answer...

Correct 4" Diameter Trailer Tail Glo Lights

Product Page this Question was Asked From

Continue Researching