Are Additional Steps Needed To Install Curt Hitch C29UR on 2018 Chrysler Pacifica Hybrid  

That is correct. To install the Curt Trailer Hitch Receiver #C29UR on your 2018 Chrysler Pacifica Hybrid you will need to remove two the exhaust hangers from the rubber isolators, and support the exhaust to make sure it does not get damaged. Next you…

Yes, the Curt Trailer Hitch Receiver #C29UR does fit your 2022 Chrysler Pacifica Hybrid. This trailer hitch has a maximum towing capacity of 4,000-lbs, a maximum tongue weight of 400-lbs, and is assembled in the USA. To complete your towing setup…

There's actually a third custom wiring harness that fits the 2017 Chrysler Pacifica. As to which you need depends on which trim package you have: Draw-Tite part #118712 fits the Limited, Touring L, and Touring L Plus models. Draw-Tite part…

There is indeed a trailer hitch receiver designed specifically to fit the Chrysler Pacifica Hybrid, and will fit your 2024 Pacifica Hybrid. The hitch is from Curt and is the following part number: - Curt Trailer Hitch Receiver #C29UR I verified this…

I checked with the trailer hitch manufacturers and can confirm there is one trailer hitch that is a fit for the 2021 Chrysler Pacifca, which is from Curt: - Curt Trailer Hitch Receiver #C29UR This hitch (which does fit the 2020 model as well) has a…

The Curt #C29UR and the Draw Tite part #76046-SK are definitely the most hidden options for your 2021 Chrysler Pacifica Hybrid but the edge goes to the Curt in terms of least visible since the safety chain loops are horizontal and smaller. I attached…

Between the Curt Trailer Hitch item #C29UR and item #C13383, I recommend the item #C29UR because it doesn't hang down as much. Both hitches are confirmed to fit the 2022 Chrysler Pacifica Hybrid and have identical 4,000 lbs towing capacities.…

When it comes to installing a hitch on your 2022 Chrysler Pacifica Pinnacle Hybrid #C29UR will not fit your vehicle. Per the manufacturer The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2 inch #C13383 will bolt right up to the frame of…

The etrailer hitch part #e89YR that you referenced does fit the hybrid models and will still allow the hands free liftgate to function but you'd have to kick to either side of the hitch opening to activate it.

The Curt Trailer Hitch item #C29UR for your 2022 Chrysler Pacifica is the same hitch as the 13466. There are no differences. This hitch is custom fit and bolts to your Pacifica with included hardware. If you are planning on towing with your Pacifica…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…