Redarc Liberty Install on 2014 Toyota Tundra With Factory 7-Way

Question

Question:

Hi - Im hoping to install a Redarc liberty in a 2014 Tundra. What adapter will get me there? Im struggling to figure it out. Thanks!

asked by: Mike

0

Expert Reply:

Assuming that your 2014 Toyota Tundra has the factory 7-way trailer connector, in addition to the # RED24FR Redarc Tow-Pro Liberty, you'll also need the # 331-TPH-017 pigtail and the # 3040-P wiring adapter. The adapter and the pigtail would plug in together with the open end of the # 331-TPH-017 going to the Redarc controller, and the open end of the # 3040-P plugging in to the factory trailer brake controller port of your vehicle.

You might also be interested in the # 331-TPSI-002 mounting bezel for the control knob to dress up the install.

I'll link to some videos that you might find helpful.

expert reply by: Mike L

0

Brake Controller Connector Location 2014 Toyota Tundra
(click to enlarge)

Answer 1

Hello Erik; the Redarc Tow-Pro Trail Brake Controller w/ Custom Harness #RED74UR is a new brake controller from Redarc. It is not the Elite or the Liberty with the main difference being the SwayStop feature. SwayStop is designed to be used when the…

view full answer...

Answer 2

The Curt T-Connector Vehicle Wiring Harness, part #C55367 is designed to fit the 2000 Toyota Tundra. The connector the harness attaches to is located behind the rear bumper. I have attached a photo that shows where the vehicle plug is located. In the…

view full answer...

Answer 3

Thank you for all of the details, you have already done quite a bit of the work in narrowing down the problem. Since the common denominator in this situation is your 2014 Toyota Tundra the issue can be isolated to that. You should be getting 12V of…

view full answer...

Answer 4

I believe that the photo you sent in is of the OBD-II port on your 2014 Toyota Tundra. This is useful if your vehicle is throwing codes but it is not used for the brake controller. As long as your Tundra has the factory 7-Way at the rear of the truck…

view full answer...

Answer 5

The easiest way to determine what could be causing the issue with your Redarc Tow-Pro Liberty Brake Controller #RED24FR, installed in your 2022 Toyota 4Runner using the Plug-and-Play Wiring Harness #RED49FR is to check the fault code chart in the…

view full answer...

Answer 6

The blue and green lights on the Redarc Tow-Pro Elite #RED44FR and Liberty #RED24FR Brake Controllers flash while the brakes are being depressed until the controller confidently learns the exact orientation. Do understand if there is a bad power…

view full answer...

Answer 7

Hey Scott! Your 2026 Ford Ranger may or may not have a brake controller port/plug, even with the tow package. There will be four wires coming out of a large wire harness by the driver side firewall, left of the brake pedal, which can be wired to the…

view full answer...

Answer 8

To install a Redarc Tow Pro Liberty in your 2023 Toyota Tacoma Sport you will need the following parts: Redarc Tow-Pro Liberty Brake Controller item #RED24FR Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers item #RED99FR…

view full answer...

Answer 9

For your 2024 Nissan Frontier I recommend the Redarc Tow-Pro Liberty Brake Controller #RED24FR. I like the Liberty because it is simple, reliable, and looks great in any vehicle. The main unit installs behind the dash, so only the control knob will…

view full answer...

Answer 10

Hi Richard! The best brake controllers on the market for your 2023 Ford Explorer XLT are going to be from Redarc. They're super easy to use and set up, and they are very reliable. They are the ones to get. Since you said you will be towing a…

view full answer...

Answer 11

The Redarc Tow-Pro Liberty #RED24FR is the way to go over the Elite #RED44FR as you get the nicer functions of the Elite at a lower price. The Elite has the ability to be the more preferred proportional style of controller as well as a time-delayed…

view full answer...

Answer 12

Hey Ken! The correct wiring harness depends on whether or not you have the brake controller port/plug. Some models did not include the plug so you will have to check your 2025 Ranger and see. There should be four wires coming out of a large wire…

view full answer...