View Cart

Trailer Brake Controller Installation - 2013 Toyota Tundra

content loading



Customers compare 90195 to these similar products


Products Featured in this Video




How to Install a Trailer Brake Controller on a 2013 Toyota Tundra


Today, on our 2013 Toyota Tundra, we'll be installing the Tekonsha Prodigy P3 Brake Controller, part number 90195. In conjunction with the Tekonsha Plug and Play Wiring Adapter, part number 3040-P. To begin our install, we'll first go ahead and mount the brake controller bracket. For this application, I'll be using a couple of self tapping screws or you can also use the screws provided with the brake controller install kit. Once we have the brake controller mounted, we'll then go ahead and set the brake controller in the bracket and secure it with the screws provided in the install kit. Next, we'll need to go ahead and plug in our Plug and Play Wiring Adapter. Before I install the wiring harness, I'm using black electrical tape to wrap up the wires to hold the ground wire to the harness and to clean up our install look. Now with the taped up, we'll go ahead and take the white connector and plug it into the manufacturer's towing port, that's located on the driver's side, just above the kick panel and between it and the parking brake pedal. Now, with that connection made, we'll take the white wire, with the pre-attached ring terminal, which should be the ground wire for our harness, and secure here it to a body ground, which our parking brake pedal bracket is grounded so we can use our self tapping screw and secure it directly to that. Now, with those connections made, we'll go ahead and route our wire back over to the brake controller and install it into the back of the brake controller. Now we have it routed and installed, I'll go ahead and use a couple of black zip ties to secure our wiring up underneath the dash, and then we'll cut off the excess from the zip ties to clean up our install look. Now with that, we're ready to hit the road. That's about it the install of the Tekonsha Prodigy P3 Brake Controller, part number 90195, in conjunction with the Tekonsha Plug and Play Wiring Adapter, part number 3040-P on our 2013 Toyota Tundra. .


Questions and Comments about this Video

add comment

Info for these parts were:

Video by:
Joe V
Video Edited:
Zack K
Video Edited:
Andrew K
Test Fit:
Patrick B
Installed by:
Jeff D
Video Edited:
Joshua S
Test Fit:
Nicholas E
Video Edited:
Jacob T
Test Fit:
Rick A
Video by:
Patrick B
Video Edited:
Andrew L
Video Edited:
Kathleen M
Video Edited:
Mike H
Video Edited:
Dustin K
Test Fit:
Shane T
Video by:
Alan C
Video Edited:
Sue W
Test Fit:
Randy B
Video Edited:
Chris R
Test Fit:
Joe B
Test Fit:
Jared G
Test Fit:
Matthew S
Video Edited:
Zach D
Test Fit:
Andrew S
Test Fit:
Brent H
Test Fit:
Shane H
Video by:
Jonathan Y
Video by:
Robert C
Video by:
Michael B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.