Trailer Hitch For 2013 Toyota Sienna That Has Best Ground Clearance

Question

Question:

I have a 2013 Toyota sienna I am looking to put a hitch on. I am looking to see which of these hitches have the ground clearance: the draw-tite 76112 and 75237, and the curt #13343 and #13105.

asked by: Taylor R

0

Expert Reply:

The trailer hitch receiver with the best ground clearance for your 2013 Toyota Sienna is from Draw-Tite:

- Draw-Tite Max-Frame Trailer Hitch Receiver # 76112

When we test fit this hitch on a 2013 Sienna, we found that the distance from the top of the hitch to the ground was approximately 12 inches, which was more than any other hitch. It also measured 5 inches from the center of the hitch pin hole to the edge of the bumper, in case you were also wondering about bumper clearance.

The Draw-Tite # 76112 also has a really nice look as well, with the hitch being fully concealed except for the receiver, so not only does it have the best clearance, it also has the best aesthetic of any hitch for your Sienna.

If you were planning on using the hitch for some towing, and needed a wiring harness for your 2013 Sienna, I highly recommend going with the option from Tekonsha as we have found these to be the most reliable. The correct fit for your Toyota is the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118498.

expert reply by: Kyle S

0

Answer 1

Honestly Ladd, not much. All of the hitches: the Curt #C13387, Draw-Tite #76226, and etrailer are basically the same size, weight (30 lbs), and have the same weight capacities. The only thing separating these hitches is going to be the actual brand…

view full answer...

Answer 2

The etrailer.com Trailer Hitch Receiver part #E98853 and the Draw-Tite Max-Frame Trailer Hitch Receiver part #76112 are both great options for your 2019 Toyota Sienna (All Models). They both have a hidden design, install in the same fashion, and are…

view full answer...

Answer 3

The main difference between these three hitches is going to be the looks and install time. EcoHitch Hidden Trailer Hitch Receiver - Custom Fit - Class III - 2" #306-X7391. Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #C13409.…

view full answer...

Answer 4

For your 2021 Honda CR-V there is quite a few trailer hitch receivers that fit the criteria you mentioned, the etrailer #e98848, the Curt #C13397, the Draw-Tite #DT79MR, and the EcoHitch #306-X7345. These hitches are really all pretty similar as they…

view full answer...

Answer 5

Hey Clint, the Draw Tite part #75362 and the Curt #14301 are both a fit for your 2013 Chevy Silverado and are great options but they are made by two different companies so they took a slightly different approach which explains the slight differences…

view full answer...

Answer 6

We have installed some of our trailer hitches on 2013 Toyota Siennas, and we check the clearance measurements when we do installations so that customers can find a suitable hitch for their need. unfortunately, The height of the Sienna does have a…

view full answer...

Answer 7

This is a great question and I can definitely understand being a bit overwhelmed trying to work through all the available hitch options for your vehicle. Just to cut right to it I specifically recommend the Curt Class III Trailer Hitch #C13343 for…

view full answer...

Answer 8

The smaller Class II hitches like #36513 will give you a little more clearance vs. Class III hitches. The Class II will have lower tongue weight and gross trailer weight capacities. A bike rack with a rise in the shank will provide more ground…

view full answer...

Answer 9

Your 2014 Toyota Sienna can be fitted with either of two sizes/classes of trailer hitch, either a light-duty 1-1/4-inch Class II type or a 2-inch Class III type that offers higher capacity. Since the costs between the two types are so close, and…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Trailer Hitch For 2013 Toyota Sienna That Has Best Ground Clearance

Featured Help Information

Miscellaneous Media

Continue Researching