Backing Plate for Tandem Axle Trailer Fender

Question

Question:

Hi, will part # hp92f work with trailer fenders hp74vr. ty

asked by: Joseph A

0

Expert Reply:

The Backing Plate # HP92FR is designed to fit the Tandem Axle Teardrop Trailer Fender # HP74VR.

expert reply by: Jacob H

0

Answer 1

Hey Thomas! Sounds to hear what happened. A blowout is never fun to have to deal with. When you say dual tires do you mean two tires on each side per axle, tandem axle where the axles are close to one another, or two axles spread spart? For a tandem…

view full answer...

Answer 2

According to my research your 2023 Rove Lite has a 5-bolt pattern so the best spare tire option comes from Westlake: - Westlake ST235/75R15 Radial Tire w 15" Phoenix Aluminum Wheel #LH52FR All of the specs match with what you have but the wheel…

view full answer...

Answer 3

Hello Donald, The Tandem Axle Teardrop Trailer Fenders for Enclosed Trailers – 15" to 16" Wheels – Qty 2 #CES74JR are constructed from 16-gauge nominal steel, offering a strong and durable solution for protecting your trailer from road…

view full answer...

Answer 4

Hey Alan, thanks for reaching out! The Tandem Axle Teardrop Trailer Fenders for Enclosed Trailers #HP74VR are really close to the specs you referenced and while they don't have a "standing" weight capacity, if you give them enough…

view full answer...

Answer 5

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 6

Hello Johnny, thanks for reaching out. Sadly, no we are not able to look up trailer parts using a VIN. There just isn't a universal VIN database for trailers like there is for motor vehicles. Typically only the manufacturer of the trailer would…

view full answer...

Answer 7

I do have options for you but we do not offer any jacks that will fit the existing bracket you have on your trailer frame. Therefore, I recommend just using the Fulton Bolt-Thru Swivel Marine Jack part #FXP15L as it is a bolt-on fit that won't…

view full answer...

Answer 8

The Electric Trailer Brake Kit part #AKEBRK-35-SA is likely what you need for your Four Winns Boat Trailer. The 3,700 lb trailer axles usually use the same spindles as 3,500 lb trailer axles so as long as you have 10" assemblies (roughly) and…

view full answer...

Answer 9

For a bearing kit for a Dexter 5200 axle we have the kit part #BK3-300 which comes with the correct bearings, races, and seal for your axle.

view full answer...

Answer 10

Hey Uriah, thanks for reaching out! The Tradesman Vaquero Self-Contained Hydraulic A-Frame Trailer Jack #ST86FR will work best if it's hardwired to a battery on your trailer, but you can also hardwire a 7-Way plug and lead like part #H20043 and…

view full answer...

Answer 11

Hey Robert, welcome back! I've got options to update your front and rear sway bars but which one you need for the front is going to depend on whether or not your 2001 Ford F-350 dually is 4WD or 2WD. I have listed the options below: Front End…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Backing Plate for Tandem Axle Trailer Fender

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching