Replacement Trailer Ramp Retaining Pins

Updated 03/12/2018 | Published 03/11/2018

Products Featured in This Question

Replacement 3/4" Diameter Pin with Linchpin and Cable for Roadmaster Tow Bars - Qty 1

(104)

$21.77

Spring Latch w/ Extended Handle and Holdback - 2" x 1-1/8" - Zinc Plated - Left Hand

(193)

$8.14

Question:

I have an old trailer that has two lost pins on each side. Never let your brother in law borrow your trailer... They were 1/2 inch by about 4 inches. There was a retaining clip that held them onto the arms and the pins went into the trailer gate that came down to use the ramp for the mower. The pins were secured with cotter pins that also had some sort of cable that kept them from falling off the arms. Ive tried to drill out bolts and other pins but nothing works well. Ive tried snap on trailer tractor implement pins too. Do you have a replacement?

asked by: Roger O

Expert Reply:

I don't believe we have an exact match but we do have pins that you could potentially retro-fit to your trailer such as # F719-182Z104. The benefit of this design is that you can't lose the pins. I have included a link below to this and other options that are similar.

expert reply by: Michael H