Recommended Hitch and Bike Rack for a 5th Wheel Camper

Question

Question:

After doing some further research, is there a bike rack that’d you’d recommend for a front mounted hitch that goes onto the front of my truck? 2016 Silverado 2500. I liked the Curt front mounted hitch as that’s the 5th wheel setup I have and it’s treated me well.

asked by: Colby S

0

Expert Reply:

The best option to mount a bike rack with your 5th wheel attached is to add a hitch to the 5th wheel and use a hitch-mounted bike rack.

For the hitch, I recommend the Curt Adjustable Width Trailer Hitch Receiver for RVs, part # C13704. This fits box frames, C-channel frames, or I-beam frames between 22" and 66" long and gives a 2" receiver. It can be either bolted on or welded on and features a maximum tongue weight capacity of 500 pounds and a gross towing weight capacity of 5000 pounds. I've linked to a video review of this hitch for you to look at. If you do not have one of the frames above or need something longer than 66" , let me know and I will find a more suitable one for you.

For your bike rack, I recommend the Swagman Original, part # S64152-2. It's a hanging style rack that is rated for 5th wheels and can handle 3 bikes up to 35 pounds each. THe Kraton vinyl cushioning helps protect frames and offers additional gripping power. I've linked to a video review of this one as well.

expert reply by: Kef G

0

Colby S.

3/16/2021

Thank you, I was looking a little bit at the Curt Rack as well. Would either work fine? Obviously this one is a little bit more expensive. Surely any 2” bike mount would work on the hitch.

Kef G.

3/16/2021

The Curt Bike Rack, part # C18087, is not rated for 5th wheels. Unfortunately, it can't be used for your application. When choosing a bike rack, you need one that is tested for 5th wheels because the amount of bounce at the rear is greater and the rack needs to be able to withstand that. We only have one bike rack that is rated for 5th wheels and can carry 4 bikes, and that is the Swagman Original.

Colby S.

3/17/2021

After doing some further research, is there a bike rack that’d you’d recommend for a front mounted hitch that goes onto the front of my truck? 2016 Silverado 2500. I liked the Curt front mounted hitch as that’s the 5th wheel setup I have and it’s treated me well.

Kef G.

3/17/2021

While using a front-mounted hitch for a bike rack is not ideal, it definitely can be done. Using the Curt hitch that you referenced, part # C31071, you will see that the vertical load (similar to a rear-mounted hitch's tongue weight) is 500 pounds. This will allow you to use the Curt bike rack, part # C18087, that you asked about earlier. Of course, there are some things to keep in mind. First, check with your state's laws about having a bike rack in front especially concerning the blocking of your plates. Second, with the Curt rack from above, you have a 4-bike rack on the front of your vehicle, so you want to pay special attention to the amount of sway this might incur. I highly recommend using a couple of the Curt Cam Buckle Stabilizing Strap, part # 18050, to keep everything stable. I've linked to video reviews of the hitch, bike rack, and strap below.

Answer 1

Hey James, In order to find the correct hitch for your Jayfeather you'll need to measure the distance between the inside of the two frame rails in order to get your frame width. From there we can then look at adjustable fit trailer hitches to…

view full answer...

Answer 2

Thanks for the photo! I can now see the issues you are having trying to install a trailer hitch on your 2019 Forest River Rockwood Ultra Lite Fifth Wheel. That said, the brackets for the Adjustable Width Trailer Hitch Receiver part #13703 and the…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 6

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 7

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 8

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 9

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

Hey James, welcome back! The B&W Custom Installation Kit w/ Base Rails item #BWRVK2506 is exactly what you need to add a set of 5th wheel rails to your 2017 Chevy Silverado 2500. The brackets are custom fit and will install in preexisting holes…

view full answer...

Recommended Hitch and Bike Rack for a 5th Wheel Camper

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching