Which Plug In Wiring Adapter Is Needed To Install Tekonsha Prodigy P3 90195 In 2021 Ram 1500?

Question

Question:

I am looking for the part number for a Tekonsha p3 break controller wiring harness for a 2021 RAM 1500. Thank you!

asked by: Jeremy C

0

Expert Reply:

The correct plug-in wiring adapter to install the Tekonsha Prodigy P3 # 90195 in your 2021 Ram 1500 is the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - Ram # 3024-P which will plug into the factory trailer brake controller port located under the dash of your Ram.

I included videos for both of the products mentioned for you to take a look at.

expert reply by: Samuel C

0

Answer 1

Yes, the K-Source Snap & Zap Custom Towing Mirrors #KS80730 you found are the correct mirrors for your 2022 Ram 1500. These custom fit mirrors have the cutouts for the puddle lights and turn signals you have on your mirrors. I recommend when you…

view full answer...

Answer 2

The 3024 and #3024-P are the exact same harness. Sometimes the part number is just listed differently.

view full answer...

Answer 3

We do offer a replacement mounting bracket for the Tekonsha P3, part #90195. The replacement bracket is part #TK5906 and comes with the mounting bracket, plastic cradle, and hardware needed for installation. Unfortunately the plug-in adapter you had…

view full answer...

Answer 4

Yes, you can use the Tekonsha Plug-In Wiring Adapter #3024-P to simply plug-in the Prodigy P3 #90195 for installing it on your 2019 Ram 1500 Classic. Please note that since you have the Classic version of the 2019 Ram 1500 your pickup is the same as…

view full answer...

Answer 5

Sometimes the trailer brake controller port can be sort of hidden, but it should be taped to another connector located under the dash of your 2021 Ram 1500. You may need to get a flash light and look up under the dash between the steering wheel and…

view full answer...

Answer 6

To install the excellent Tekonsha Prodigy P2 Trailer Brake Controller #90885 on your 2019 Ram 1500 you just need the Plug-In Wiring Adapter #3024-P. The factory brake controller port should be located underneath the dash, above and in front of the…

view full answer...

Answer 7

I try to steer people away from the Air Lift 1000 for Coil Springs, like part #AL60828HD for your 2022 Ram 1500, just because the springs can pinch the bags where the Air Lift LoadLifter 5000 #AL57375 just require the 5 psi minimum to help keep the…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

To install a Redarc Tow Pro Liberty in your 2023 Toyota Tacoma Sport you will need the following parts: Redarc Tow-Pro Liberty Brake Controller item #RED24FR Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers item #RED99FR…

view full answer...

Answer 12

You're right, the mounting bracket is unique (in a good way) for the Curt TriFlex NEXT Trailer Brake Controller #C24VV. The bracket is smaller and all you do is put the included adhesive tape on the bracket and stick it wherever you like under…

view full answer...

Which Plug In Wiring Adapter Is Needed To Install Tekonsha Prodigy P3 90195 In 2021 Ram 1500?

Featured Help Information

Miscellaneous Media

Continue Researching