Replacement Easy Snap Mounting Hardware for Thule 674 Evolution Cargo Box

Question

Question:

I have a Thule evolution #674 cargo box. It has the quick snap plastic clamps mounted in the box, but I dont have the u-bolts. I see you sell the whole package ... do you have just the u-bolts? They are longer than the sidekick u-bolts

asked by: John F

0

Expert Reply:

Unfortunately, the only way to obtain the U-bolts for the Thule 674 Evolution cargo box is to purchased what they refer to as the Hardware Bag, part # TH05820. I feel for you, the kit is expensive but if the box is still in overall good condition purchasing the hardware is a lot less expensive than replacing the cargo box itself. At least this way, you'll have some extra parts on hand if needed.

expert reply by: Mike L

0

Answer 1

From my research I found the box mounting dimensions for the 669ES Mountaineer ES require 23 5/8" of minimum crossbar spacing, 34" of maximum crossbar spacing, 20" mounting width and 26" of rear hatch clearance. If this is not the…

view full answer...

Answer 2

Yes, in order to attach the Thule Cascade Cargo Box to your 2017 Subaru Outback Wagon I recommend using the Replacement Hardware Kit part #TH05603. The u-bolts included with this kit are designed specifically for aero crossbars and will work well for…

view full answer...

Answer 3

Hey Colton! That 43216 U-bolt was discontinued by Thule. The only option we have for a replacement bolt/hardware is the complete mounting kit. The Replacement EasySnap Mounting Kit for Thule Cargo Boxes #TH05820 replaces the mounting hardware for the…

view full answer...

Answer 4

We do have replacement hardware for the Thule Evolution 1200 cargo box, but #CTC-18PARTS is not the correct part. The actual replacement hardware kit for the Thule Evolution 1200 is the Thule EasySnap Mounting Kit #TH05820 .

view full answer...

Answer 5

The replacement EasySnap Mounting Kit, part #TH05820 that you had looked at is compatible with your Evolution 1600 cargo box, as confirmed by Thule. I've linked to a video outlining what's included in the kit.

view full answer...

Answer 6

I have attached a photo for you that shows how to stop the brackets from sliding within the channel on a Thule Cascade XT Cargo Box. As you can see, there is a lever on the actual bracket which will stop it from sliding within the track once you line…

view full answer...

Answer 7

For a Thule Evolution 1800 the mounting hardware is actually the EasySnap hardware which does not use knobs at all. Instead you'd need the EasySnap hardware kit part #TH05820 and you'd be set.

view full answer...

Answer 8

Yes, the Replacement EasySnap Mounting Kit part #TH05820 will fit your Thule Adventurer 650 Cargo Box but you might need to drill one new hole for each of the u-bolts but this will not affect anything with the box and it will be your only option if…

view full answer...

Answer 9

We used to carry the U-bolts for the Thule Evolution but they are not offered by Thule individually so we can't get them. Only option is the entire replacement hardware system part #TH05820.

view full answer...

Answer 10

The Replacement EasySnap Mounting Kit part #TH05820 is the replacement hardware needed for the Thule Evolution 1600 Cargo Box.

view full answer...

Answer 11

To replace the mounting hardware for your Subaru/Thule Cargo box, you'll want to use the Replacement EasySnap Mounting Hardware #TH05820 . The U-bolts in this kit are 3-1/4 wide x 3" long x 1/4" diameter and will fit on most factory and…

view full answer...

Answer 12

You have the U-Bolts which have a rubber pad on them. That rubber pad will go underneath your crossbar and the two threaded ends will go through your cargo box holes. The stickers go on the holes that you're not using on the cargo box. The…

view full answer...

Replacement Easy Snap Mounting Hardware for Thule 674 Evolution Cargo Box

Continue Researching