Recommended Cost Effective Flat Towing Setup For 2007 Hummer H3
Updated 03/09/2021 | Published 03/06/2021
Products Featured in This Question
Question:
Hi, I am looking to flat tow my 2007 Hummer H3 behind my motorhome. I live in Newfoundland. Can you quote me the required equipment that will meet the specs for my Hummer and my provincal requirements. I am looking for the cheapest solution. Much apprectiated.
asked by: Ron M
Expert Reply:
I would be happy to help!
To flat tow your 2007 Hummer H3 behind your motorhome you will first need a base plate kit of which I recommend the Demco Classic Base Plate Kit - Fixed Arms # DM9518193 which will pair perfectly with the Demco Commander II Non-Binding Tow Bar - Victory Series - RV Mount - 2" Hitch - 6,000 lbs # DM9511012. The # DM9511012 is a great choice due to its 6000lb weight capacity and its non-binding arms that allow you to quickly and easily unhook your tow vehicle even on un-even terrain. The # DM9511012 includes safety cables so you will not need to purchase them separately.
For tow bar wiring I recommend the Roadmaster Universal Hy-Power Diode Wiring Kit # RM-154 which will add a 4-way connector to the front of your H3, and will connector to the 7-way connector on your tow vehicle by using a 4-way to 7-way adapter like # HM47065
Moving on to a supplemental braking system I recommend the Brake Buddy Select 3 Portable Supplemental Braking System - Proportional # HM39524 which is a proportional system meaning the braking force applied to the brakes in your H3 match the braking force you apply to the brakes in your tow vehicle. The only restriction I could find that is specific to Newfoundland is that the vehicle and motorhome need to be able to stop in a specified distance from 30 MPH.
Lastly you will more than likely need a high-low adapter to level your tow bar to your tow vehicle so I have included a link to a helpful article that goes over how to measure for the correct adapter, and a link to all of our high-low adapters for you to take a look at.
It is always a good idea to check the recreational towing section of your vehicles owner's manual for any restrictions regarding flat towing, and for any special steps required to make your vehicle ready to be flat towed.
I included videos for the products mentioned for you to take a look at.
Product Page this Question was Asked From
Demco Classic Base Plate Kit - Fixed Arms
- Tow Bar Base Plate
- Fixed Draw Bars
- Visible
- Demco
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Search Results: 7 pin rv connector
- Search Results: 7 pin 4 pin connector
- Shop: Vehicle Tow Bar Wiring
- Search Results: vehicle tow bar brake system
- Search Results: demco tow bar
- Search Results: electric break controller
- Search Results: break buddy
- Search Results: tow bar and base plate
- Shop: Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 4-Way Flat Connectors
- Shop: Trailer Wiring
- Shop: Base Plate for Tow Bar
- Shop: Demco Commander II Non-Binding Tow Bar - RV Mount - 2" Hitch - 6,000 lbs
- Article: Flat Towing Package for 2025 Jeep Wrangler
- Shop: etrailer Invisible Base Plate Kit - Removable Arms
- Shop: Blue Ox Off-Road Bumper Adapters for Blue Ox Motorhome Mounted Tow Bars - 7/8" D-Rings
- Shop: etrailer Invisible Base Plate Kit - Removable Arms
- Shop: etrailer Invisible Base Plate Kit - Removable Arms
- Shop: Blue Ox Off-Road Bumper Adapters for Blue Ox Motorhome Mounted Tow Bars - 1" D-Rings
- Video: Hands-On with the Blue Ox Off-Road Bumper Adapters for Blue Ox Motorhome Mounted Tow Bars
- Shop: Vehicle Tow Bar Brake System
- Video: Roadmaster Tow Bar Wiring Kit Light Test
- Video: Review of Roadmaster Flat Tow Wiring Harness - 4 Diode Universal Wiring Kit Towed Vehicle - RM-154
- Video: Complete Breakdown of the Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles
- Video: Set up: Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles on a 2006 Hummer H3
- Video: Demco Base Plates DM9523023 Review
- Video: An In-Depth Look at the Roadmaster Battery Charge Line Kit for Towed Vehicles
- Q&A: Are Replacement Parts Available For A Brake Buddy Classic Clevis
- Q&A: Parts Needed To Install Brake Buddy Classic II In a 2nd Vehicle
- Q&A: Replacement Breakaway Switch Solution for Brake Buddy II Supplemental Braking System
- Q&A: How to Install the Curt T-Connector # C55106 on a 2008 Honda CR-V
on Tow Bar Base Plate
