Search: 7 pin 4 pin connector   >  

Hey Robert, so for base plates that are going to be compatible with both your Gladiator and your Wrangler I'd recommend going with the Roadmaster Direct-Connect Base Plate Kit #RM-521453-5. These are going to be direct connect base plates…

You were on the right track already with the #41990 for your 2010 Mitsubishi Fuso FE145. There are no custom fit hitches so a universal weld-on is the only option. We have the #41990-07 that comes with 7" brackets, the #41990-16 with…

I have a solution that would allow you to install a brake controller in your 2018 Acura MDX without factory wiring. You'll need the Redarc Tow Pro Elite part #RED44FR that you mentioned with the install harness #3028-P and then the 7-way kit part…

I attached a picture that I took from the instructions for the TracRac #TH29056XT that you referenced that shows the tech tip for the Ford E-150s like what you have. The issue is the shape of the Ford gutter. The strip pushes the J-hook clip far…

At this time there is only one ladder rack that is compatible with a tonneau cover for your 2024 Toyota Tundra. The rack is the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack #Y01151-5955. However, this does depend on the tonneau cover you have…

There are a few different trailer wiring harness options for a 2015 Jeep Wrangler Unlimited. The Hopkins Endurance Quick-Install 7-Way Trailer Connector part #HM42190 is only for models with the factory tow package. If you don't have the factory…

I measured the distance of the hitch pin hole to the front of the Curt Cargo Carrier for 2" Hitches #C18113 and found it was 29 inches from the center of the hitch pin hole to the furthest part (the front) of the carrier, as you can see in the…

The 4-way trailer connector wiring harness I recommend for your 2008 Ford Econoline E-350 Van is the part you reference, part #118551. This custom wiring harness adds a 4-way flat trailer connector at the back of your Ford Van to power your…

To install the Prodigy P3 part #90195 on your 2014 Acura MDX that does not have a factory 7-way you'd need to first start with a 7-way kit part #118289 and then use the brake controller install harness part #3028-P and you'd be set with…

The Thule Telescoping Ladder for Vans #TH301404 uses a magnetic mount system. This can be placed in multiple places on your van depending on what point you need to access. As far as a mount to store the ladder this can vary from vehicle to vehicle…

For your 2024 Ford F-53, I recommend checking out the Timbren Front Suspension Enhancement System #TFFF53B for the front, and the Timbren Rear Suspension Enhancement System #TFRF53A for the rear. These kits do not require drilling, will replace your…

A factory 7-way trailer connector isn't all you need to power a trailer's electric brakes. You still need a brake controller. Some Ford F-150s are equipped with a factory integrated brake controller, which you may have. If your 2012 Ford…