Parts Needed To Install Redarc Tow Pro Elite In 2018 Toyota 4Runner

Updated 03/02/2021 | Published 02/25/2021

Products Featured in This Question

Redarc Tow-Pro Elite Brake Controller - Dash Knob - Off-Road Mode - Up to 3 Axles - Proportional

(1676)

$290.00

Mounting Panel for Redarc Tow-Pro Trailer Brake Controller Control Knob

(733)

$13.00

Plug-and-Play Wiring Harness for Redarc Tow-Pro Classic, Elite, or Liberty Trailer Brake Controllers

(308)

$35.00

Question:

I have a 2018 Toyota 4 Runner, looking to buy the Redarc Tow Pro Elite brake controller. Ive read a lot of QandA on your site, but still a little confused about which switch plate and wiring harness I should buy. Please advise.

asked by: Jeff C

Expert Reply:

I would be happy to recommend a mounting panel and wiring harness to get the Redarc Tow Pro Elite # RED44FR installed in your 2018 Toyota 4Runner.

Starting with the wiring harness you will need the Plug-and-Play Wiring Harness # RED49FR which is confirmed to fit the factory trailer brake controller port on your 2018 4Runner. This port is above the emergency brake pedal.

Moving on to the mounting panel, we have had customers mention that the Mounting Panel for Redarc Tow-Pro Trailer Brake Controller Control Knob # 331-TPSI-002 fit their 2018 4Runner perfectly, so this is the option I recommend. I went ahead and included two pictures of this mounting panel installed on a customers 2018 Toyota 4Runner for you to take a look at.

I included videos for each of the products mentioned for you to take a look at.

expert reply by: Samuel C